Carvin C2040 Concert Series Operating Guide - Page 3

CHANNEL FEATURES • 12 and 20 ch models • 8 XLR + 4 Stereo CH or 16 XLR + 4 Stereo CH • 4 Buses + L/R + MONO • Adjustable Gain attenuator • 3 Band EQ w/ Mid sweep • Low Cut Filter • 4 Ch Monitor Sends • 2 Ch Effects Sends • Ch mute/Peak indicator • PFL/solo 3 BAND CH EQ + LO CUT The 3-band Ch equalizer offers both HF and LF EQ plus a mid sweep to dial in critical midfrequencies. The LO CUT switch eliminates frequencies below 75Hz. This is ideal for reducing stage rumble and works well on channels such as guitar and snare drum where frequencies below 75Hz are not common. 4 CH MONITOR SENDS 4 monitor sends per channel is ideal for providing each band member their own custom monitor mix. Send each member's mix to a powered monitor or to an in-ear monitor transmitter. 2 CH EFFECT SENDS 2 effects sends permit two simulations effects for each channel utilizing the two on board effects processor or external processors. See Demo CARVINCHANNEL.COM MASTER FEATURES • 4 Sub Groups + L/R • Center/Sub output • 2 effect processors - 256 effects each • Effects to monitors • 2 9-band L/R Graphic EQ's • USB power port • C2040: Rear slots for wireless options (up to 2 mics or beltpacks) • Ultra low THD - less than .001% • SwitchMode™ 90-260 VAC power supply HEADPHONE MONITORING Assign any combination of the 4 ch monitors, 4 busses, L/R and MONO outputs and for headphone monitoring. USB POWER PORT A convenient USB power port is availalbe for powering your iPod™ while in use or to power an optional LED gooseneck light. WIRELESS OPTION FOR C2040 The exclusive True Diversity USM16 built-in wireless system can be installed in the C2040. Two recievers can be installed which can be used with wireless microphones, lavalier mics or guitar transmitter. The signals are automatically routed to the first two channels on the console. Each system is connected with a simple plug-in connector. For more information, read about the UX16 wireless products, which is the outboard version of the USM16. See Carvin.com/USM. CH FADERS & ASSIGN SWITCHES Each channel has assign switches that allow the operator to bus each channel to the desired output. A mute and PFL switch for solo monitoring is also available on every channel. SPECIFICATIONS Freq. response: 20-20k Hz ±1 dB THD distortion: .01% 20-20k Hz E I N: -117 dBm S/N Ratio 90 dB Dynamic Range: 104 dB Mic Gain: 52 dB Line Gain: 30 dB Total Gain: 72 dB (balanced) Max Output: +28 dBm Power Req. 90 to 250VAC 50-60Hz C1240: 14.5"W x 16.3D x 3.75"H, 14 lbs 36.8cmW x 41cmD x 9.5cmH, 6.4 kgs C2040: 22.2"W x 16.3D x 3.75"H, 18 lbs 56cmW x 41.4cmD x 9.5cmH, 8.2 kgs