Carvin C2040 Concert Series Operating Guide - Page 5

17 1 2 3 4 5 6 7 6 8 9 10 11 12 13 14 15 16 18 34 33 20 19 21 36 25. MONO/SUB CONTROL A mono output is created from the L/R master faders (post) for center, subwoofers, or side fill speakers. The output is at the MONO/SUB XLR connector (#37). 26. HEADPHONE/METER SOURCE 37 The stereo PHONES control sets the level of the PHONES jack (#35). The L/R, MONO, MON 1-4 & SUB 1-4 switches allow for monitoring of these 35 sources through the headphones and see the 32 levels on the L/R LED meters (#28). 27. PFL RED LED Indicates that the headphone & meters are monitor- ing only the channels or groups where the PFL is 30 switched on. 28. L/R LED VU METERS This group of 10 LED's offer 6 dB increment resolution that give the operator a visual indication of the mixer's output levels, selectable by the METER SOURCE or PFL switches (#26). 29 29. DUAL 9 BAND GRAPHIC EQs are one octave filters at 63,125, 250, 500, 1k, 2k, 4k, 8k & 16k Hz centers that offer ±12dB adjustment to enhance the main mix. 20 30. USB POWER PORT This port supplies +5V USB power to run accessories like LED lighting or to charge MP3 players. 31. POWER BLUE LED Verifies the mixer is on. 32. EFFECTS 1 & 2 OUTPUT JACKS 31 1/4" outputs for external effects. Return stereo effects into the stereo channels. 19 33. MONITOR 1-4 XLR OUTPUTS XLR outputs provide balanced signals for con- necting either powered monitors or power amps. 28 34. SUB GROUP 1-4 OUTPUT JACKS 27 4 balanced 1/4" outputs correspond to the 4 sub group faders. Depending on the intended use of the sub groups, connect multi-track recording devices, powered speakers or power amps. 35. HEADPHONE JACK 26 1/4" stereo jack for headphone or control room 21 output. 36. LEFT & RIGHT XLR OUTPUTS 25 This set of balanced XLR connectors are for connecting the main L/R output to power amps 23 or recording gear. 37. MONO/SUB XLR OUTPUTS A bal. XLR output is featured for side fills or subwoofers. See Demo CARVINCHANNEL.COM 22 24