Carvin UX1000-MC UX1000-MC Product Manual - Page 2
Carvin Engineering Data - manual
View all Carvin UX1000-MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
CARVIN ENGINEERING DATA UX1000-MC, UX100BP WIRELESS SYSTEMS OPERATING MANUAL Congratulations on your purchase of the UX1000 SERIES Professional Wireless System. These systems include a receiver along with a handheld mic with transmitter (UMC1000) or a belt-pack transmitter (UBP1000) depending on the model purchased.The headworn mic (UX-HM2), cable for instrument (UXGT) and lavaliere mic (UX-LP1) are all available as additional options to the UBP1000 belt-pack system. The receiver features true UHF diversity reception. Two antennas feed two completely independent RF receivers on the same frequency. Automatic logic circuitry continuously compares and selects the superior signal to provide better sound quality and reduce the possibility of interference and dropouts. Both the transmitter and receiver have 960 user selectable channels, which can be grouped into four groups. The receiver can be mounted in a standard 19" rack (1U) with use of the optional UX-DR adapter. The versatile UBP1000 belt-pack transmitter is designed for use with condenser microphones as well as Hi-Z instrument pickups. Please note that in multiple-system applications there must be one transmitter per receiver. GETTING STARTED QUICKLY If you're like most new owners, you're probably in a hurry to plug your wireless system in and use it. Here are some brief instructions to get you going quickly. With the wireless system unplugged and the unit turned off, complete the following procedures: 1. CHANNEL CHECK Check that both the transmitter and receiver are set to corresponding channel. If multiple systems are used, each system must be set to their own channel. 2. OUTPUT CONNECTIONS There are two audio outputs on the back of the receiver: balanced XLR and unbalanced 1/4". Connect the appropriate cables for your system. 3. POWER CONNECTIONS Connect the included AC adapter to the DC power input on the back of the receiver. Plug the adapter into a standard 120 volt 60 Hz AC power outlet. 4. RECEIVER POWER ON Turn down the Volume control of the receiver as well as the mixer. Switch on the receiver only. Do not switch on the transmitter. The power indicator will light up even though the transmitter is not on. 5. BELT PACK SETTINGS Connect the instrument cable or mic to the Belt-pack. Set the rear gain switch to -20 for mic or 0 for instrument use. Set the fine gain control to 12 o'clock. Reduce if distortion occurs. For your records, record the following information. Serial No Invoice Date rev A 6. BATTERY Insert fresh AA alkaline batteries into the transmitter. 7. TRANSMITTER POWER ON Switch the transmitter mic to the "on" position. 8. SOUND CHECK To do a sound check, gradually raise the level while watching the AF level indicator. Increase the level until the AF level indicator peaks. This indicates that maximum level without distortion has been reached. On the belt pack adjust the AF level of the transmitter using the included screwdriver. RECEIVING INSPECTION-read before getting started INSPECT YOUR WIRELESS SYSTEM FOR ANY DAMAGE which may have occurred during shipping. If any damage is found, please notify the shipping company and CARVIN immediately. SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your unit, always use the original carton and packing material.This will provide the bestpossible protection during shipment. CARVIN and the shipping company are not liable for any damage cause by improper packing. SAVE YOUR INVOICE. It will be required for warranty service if needed in the future. SHIPMENT SHORTAGE. If you find items missing, they may have been shipped separately. Please allow several days for the rest of your order to arrive before inquiring. RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this manual for your records. Keep your portion of the card and return the portion with your name and comments to us. UX1000/UMC1000/UBM1000 SPECIFICATIONS: RECEIVER UX1000 HANDHELD MIC TRANSMITTER UMC1000 Receiving System Stability Signal-to-noise Image Rejection THD RF Sensitivity Audio Output Output Conn. Power Supply Dimensions Net Weight Accessories Warranty Diversity- PLL Synthesized ± 0.005% >100 dB >60 dB ≤1% @ 1kHz -107dBµ for 12 dB S/N AD -12 dBµ / 800 ohm -unbalanced Unbalanced 1/4" phone jack Balanced XLR M-type 12-18V DC, 500 mA, with provided AC adapter 8.307" (211 mm) W x 1.575" (40 mm) H x 5.394" (137 mm) D 2.3 lbs (1.05 kgs) Rack mount adapters, AC adapter 90 days Polar Pattern RF Power Output Spurious Emissions Dynamic Range Battery Current Consumption Battery Life Dimensions Net Wt (no battery) Accessory Included Warranty Unidirectional 3 mW Under federal regulations ≥100 dB AA 1.5v alkaline qty 2 30 mA typical Approx. 25 hours 9.65" long, 2.10" dia. 12.7 oz (360 grams) mic clip 90 days BELT PACK TRANSMITTER UBM1000 Spurious Rejection Stability Frequency Deviation Battery S/N Ratio Current Consumption Dimensions Net Wt (no battery) Warranty < -60 dBC ± 0.005% ± 48kHz AA 1.5v alkaline qty 2 >100dB (1kHz-A) 100mA typical 2.56" W x 4" H x 1" D 2.8 oz (78 grams) 90 days c 12340 World Trade Drive, San Diego, CA 92128