Casio KL 750B Owners Manual - Page 11
Part 5, Character Size and Text Effects - label it
UPC - 079767156787
View all Casio KL 750B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. Input the new characters (XYZ). • Inputting the new characters causes them to be inserted at the cursor posi- tion. The existing characters are opened up to make room for the new characters. To change existing characters to different ones Example: To change the text "ABCDEF" to "XYZDEF". 1. With the original text on the display, use either the BS key or DEL key to delete the characters to be changed (ABC). • Remember to use the correct cursor location for the key you plan to use to delete the characters. See page 9 for details. 2. Input the new characters (XYZ). Part 5 Character Size and Text Effects This part of the manual explains how to change the size of characters. It also tells you how to assign text effects like underlining, shading, and box printing. Character Size The following table shows the six character sizes that are available. Character Size Indicator 1×1 1×2 1×3 2×1 2×2 2×3 Actual Size (mm) 3×3 3×6 3×9 6×3 6×6 6×9 Character size changes are applied to printed text only. The size of the displayed text does not change. Important! • Any character size specification you make is applied to all the characters on the display. You cannot make multiple specifications for specific characters. • The Label Printer automatically adjusts the character size whenever you in- put a ¥ symbol to create a 2-line label as shown below. Initial Size 2×1 2×2 2×3 Size After B Operation 1×1 1×2 1×3 Note that you cannot input a ¥ symbol if you are using 6mm wide tape. To change the character size Example: To input "ABXYZ" as 2×2 characters. 1. Input the text. 2. Press FUNCTION 2 (SIZE) to display the cur- rent character size setting. 2×2 3. Use K and L to change the displayed size in the following sequence. 1×1 1×2 1×3 2×1 2×2 2×3 2×3 2×2 2×1 1×3 1×2 1×1 4. When the character size you want to specify is on the display, press SET to select it and return to the text display. XYZ Note • You could also perform the above procedure in reverse, specifying the char- acter size first and then inputting the text. E-10