Casio QV-5000SX Owners Manual - Page 11
Enlarged Image Movement, Selecting a Specific Image, To start Auto Play
View all Casio QV-5000SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4. Use [+] and [-] to select VIEW, and then press the shutter button. Enlarged Image Movement PLAYBACK 5. Use [+] and [-] to select ZOOM, and then press the shutter button. • This magnifies the center part of the image to twice its normal size. 6. Use [+] and [-] to slide the image so you can view the part of it that you want. 7. After you are finished, press any button be- sides [+], [-], or DISP return the image to its normal size. • Pressing [-] slides the image in the opposite direction. NOTE Zooming an image while image information is turned on (page 16), an image part indicator appears in the upper right corner to indicate which part of the image is currently on the screen. Display of the image part indicator can be toggled on and off by pressing DISP. 41 PLAYBACK Displaying Multiple Images The following operation lets you simultaneously view either four or nine images on the same screen. This capability is especially useful when playing back to the screen of a connected TV, and can be used to display a catalog of products, etc. • The multi-image screen shows all 16 images of a movie on a single screen. 1. Slide the Function Switch to PLAY. 2. Press MENU. 3. Use [+] and [-] to select VIEW, and then press the shutter button. 4. Use [+] and [-] to select 4PAGE or 9PAGE, and then press the shutter button. • The first image of the set is the image that was on the screen when you performed step 2 of this operation. The other images are those that sequentially follow the first one. 5. Use [+] and [-] to scroll through images stored in memory. 6. After you are finished, press any button be- sides [+], [-], or DISP return to the normal single-image display. 42 Selecting a Specific Image Use the following operation to select one of the images on a multi-image screen and change to the display of that image only. 1. Use the operation on page 42 to display the multi-image screen that contains the image you want. 2. Press DISP. 1F • This displays the image number on the upper left image. 3. Use [+] and [-] to move the page (image) num- ber display from image-to-image on the monitor screen. 4. Press the shutter button to display the image whose page (image) number is shown. PLAYBACK Auto Play Auto Play automatically scrolls through the images stored in memory. You can also specify how much time should be allowed between each image. IMPORTANT! Auto Power Off (page 20) is disabled whenever Auto Play is being used. This means you should not leave Auto Play running when using batteries to power the camera. Doing so may rundown batteries. Be sure to stop Auto Play and turn off the camera after you are finished. 43 PLAYBACK To start Auto Play 1. Slide the Function Switch to PLAY. 2. Press MENU. 3. Use [+] and [-] to select VIEW, and then press the shutter button. 4. Use [+] and [-] to select AUTO PLAY, and then press the shutter button. 44 5. Use [+] and [-] to select the screen size, and then press the shutter button. • Auto Play starts using the screen size you specify. 6. To stop Auto Play, press any button besides MENU or LCD button. • Note that all buttons are disabled while an image change is in progress. Wait until an image is stopped on the screen before performing a button operation, or hold down the button until the image stops.