Casio XJ-A141 User Guide - Page 45

Indicator/Error Message Description and Required Action POWER LIGHT TEMP : Amber flashing J Amber steady :- :- Power has turned off automatically due to internal overheating. Perform the following steps. 1 Check for any blocking of the projector's intake vents and exhaust vents, and make sure that there is sufficient space around the projector. See "Setup Precautions" (page 10). Message : Internal temperature is too high. The projector will turn off. 2 If there is dust accumulated around the intake vents and/or exhaust vents, remove it. See "Cleaning the Projector" (page 43). If there is no problem with the projector's vents, confirm that the POWER/ STANDBY indicator is lit amber (without flashing), and then turn power back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. POWER LIGHT TEMP : Amber flashing J Red steady :- : Red flashing (0.5-second interval) Power has turned off automatically due to internal overheating. This causes a dialog box containing the text in the next item below to appear the next time you turn on the projector. Follow the steps that are provided. Message : - POWER : Green steady LIGHT : - TEMP : - Message : The projector has a history of turning off due to high temperature. Check air vents for blockage. POWER : Amber flashing J Red steady LIGHT : Red steady TEMP : Red steady Message : There is a problem with the fan. The projector will turn off. POWER : Amber flashing J Red steady LIGHT : - TEMP : Red steady Message : A system problem has occurred. The projector will turn off. The last time you were using the projector, power turned off automatically due to internal overheating. Press the [ESC] key to clear the warning message and perform the following steps. 1 Check for any blocking of the projector's intake vents and exhaust vents, and make sure that there is sufficient space around the projector. See "Setup Precautions" (page 10). 2 If there is dust accumulated around the intake vents and/or exhaust vents, turn off the projector and remove it. See "Cleaning the Projector" (page 43). 3 Disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Power has turned off automatically due to a fan problem. Confirm that the POWER/STANDBY indicator is lit red (without flashing) and that the fan has stopped. After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Power has turned off automatically due to a system problem. After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. 45