Casio XJ-ST155 Setup Guide - Page 14

Getting Ready Loading Remote Controller Batteries Important! z Be sure to use alkaline batteries only. *Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 1. Open the battery cover on the back of the remote controller. 2. Load two new batteries into the case, making sure that their positive (+) and negative (-) ends are facing correctly. 3. Close the battery cover on the back of the remote controller. Replacing Remote Controller Batteries Open the battery cover on the back of the remote controller, replace the old batteries with new ones, and then close the battery cover. Important! z To avoid running down the batteries, store the remote control unit so its buttons are not pressed inadvertently. Setting Up the Projector Place the projector onto a table, desk, or stand that is level and firm, making sure you allow enough room around it. Best results can be obtained when the projector is pointed directly at the screen, and not at an angle. XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750 XJ-ST145/XJ-ST155 Screen Screen z The projector can be configured for projection from the back of a screen. For details, see the User's Guide on the CD-ROM that comes with the projector. C E-12