Casio XJ-ST155 Setup Guide - Page 16

Getting Ready 3. Make fine adjustments to the elevation angle of the projector by rotating the front foot. 4. Make fine adjustments to the horizontal tile of the projector by rotating the rear feet 3. Important! z To retract the front foot, hold down the release button and slide the front foot back into the projector. Never try to forcibly change the front foot position without pressing the release button. Connecting a Computer to the Projector Connect the projector's COMPUTER IN 1 or COMPUTER IN 2 terminal to the RGB terminal of a computer as shown in the illustration below. COMPUTER IN 1 terminal AUDIO IN 1 terminal Bundled mini D-Sub cable To monitor terminal (analog RGB output terminal) COMPUTER IN 2 terminal AUDIO IN 2 terminal To line output terminal Audio cable (commercially available) Important! z Always turn off the projector and the computer before connecting them. z Take care so the volume level of the computer is not set too high. NOTE z To connect to an external input source other than a computer (video device, etc.), see the User's Guide on the CD-ROM that comes with the projector. E-14