Casio XJ-ST155 Setup Guide - Page 15

Getting Ready Setup Precautions z Use a conveniently located power outlet that you can reach easily when you need to unplug the projector. z Do not allow any objects to be within the area indicated by the dashed line below, which is an area within 30cm (11.8 inches) of the projector. Keep all obstacles and other objects at least 30cm away from the projector's vents. z Airflow from air conditioning equipment can blow the heat being exhausted from the area around the projector's lens in a way that causes heat ripples to appear in the projected image. If this happens, adjust the airflow of the air conditioning equipment or move the projector. Intake-exhaust vents Intake-exhaust vents 30cm (11.8 inches) Intake-exhaust vents Intake vents Changing the Projector Elevation Angle 1. Lift up the front of the projector and press the release button 1. z This will cause the front foot 2 to extend from the projector. 2 1 3 2. While holding down the release button, raise and lower the front of the projector. When the front foot is approximately the height you want, release the release button. z The front foot will lock at the position where you release the release button. E-13