Celestron Celestron Origin Intelligent Home Observatory Nebula Filter for Orig - Page 2

Care And Cleaning Of The Filter

Page 2 highlights

3. C arefully grasp the edge of the clear filter's cell and rotate it counterclockwise. Completely unthread and remove the clear filter from the drawer. Store the clear filter in the case included with the Nebula Filter when not in use. 4. Install the Nebula Filter by fully threading its cell clockwise into Origin's filter drawer. Refer to the picture below for the proper orientation of the filter in the drawer. If it is threaded into the wrong side of the drawer, the drawer will not seat properly inside Origin. CARE AND CLEANING OF THE FILTER Avoid touching the optical surfaces of the filter. Handle the filter by its cell only. Keep the filter in its plastic case when not in use. If the filter remains installed in Origin, keep the dust cover on. If needed, remove dust with a blower bulb or an optical cleaning brush. If the filter must be cleaned, apply a few drops of optical cleaning solution to an optical grade tissue. Gently wipe one small area at a time. Do not rub. Use a new tissue and solution for each wipe. 4. Place the filter drawer back into Origin. Reinstall the lens shade. The Nebula Filter is now ready to use. After you have installed the Nebula Filter, you'll need to refocus Origin. You can do this with a single tap in the Origin app or using the Origin PC software. Filter Glass Glass Thickness Filter Diameter Clear Aperture Coatings Filter Cell Filter Threads Height of cell Schott B270 2.0mm 25mm 24mm Dichroic multi-bandpass and multi-layer antireflection coatings Aluminum, black anodized M28.5 x 0.6 6mm total (4mm shoulder height, 2mm thread height) This product is designed and intended for use by those 14 years of age and older. If you wish to remove the Nebula Filter from Origin (to image a star cluster or galaxy, for example), be sure to reinstall the clear filter (and refocus). If you do not reinstall the clear filter, Origin's optical performance will be somewhat degraded. © 2022 Celestron • All rights reserved 2835 Columbia Street • Torrance, CA 90503 U.S.A celestron.com Need assistance? Contact Celestron Technical Support celestron.com/pages/technical-support celestron.com/pages/warranty 03-22 ENGLISH | 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

ENGLISH | 2
3.
Carefully
grasp
the
edge
of
the
clear
filter’s
cell
and
rotate
it counterclockwise. Completely unthread and remove the clear filter from
the drawer. Store the clear filter in the case included with the Nebula Filter
when not in use.
4.
Install the Nebula Filter by fully threading its cell clockwise into Origin’s filter
drawer. Refer to the picture below for the proper orientation of the filter in the
drawer. If it is threaded into the wrong side of the drawer, the drawer will not
seat properly inside Origin.
4.
Place the filter drawer back into Origin. Reinstall the lens shade. The Nebula
Filter is now ready to use.
After you have installed the Nebula Filter, you’ll need to refocus Origin. You
can do this with a single tap in the Origin app or using the Origin PC software.
If you wish to remove the Nebula Filter from Origin (to image a star cluster or
galaxy, for example), be sure to reinstall the clear filter (and refocus). If you
do not reinstall the clear filter, Origin’s optical performance will be somewhat
degraded.
CARE AND CLEANING OF THE FILTER
Avoid touching the optical surfaces of the filter. Handle the filter by its cell only.
Keep the filter in its plastic case when not in use. If the filter remains installed in
Origin, keep the dust cover on.
If needed, remove dust with a blower bulb or an optical cleaning brush. If the
filter must be cleaned, apply a few drops of optical cleaning solution to an
optical grade tissue. Gently wipe one small area at a time. Do not rub. Use a
new tissue and solution for each wipe.
Filter Glass
Schott B270
Glass Thickness
2.0mm
Filter Diameter
25mm
Clear Aperture
24mm
Coatings
Dichroic multi-bandpass and
multi-layer antireflection coatings
Filter Cell
Aluminum, black anodized
Filter Threads
M28.5 x 0.6
Height of cell
6mm total (4mm shoulder height, 2mm thread height)
This product is designed and intended for use by
those 14 years of age and older.
© 2022 Celestron • All rights reserved
2835 Columbia Street • Torrance, CA 90503 U.S.A
celestron.com
Need assistance?
Contact Celestron Technical Support celestron.com/pages/technical-support
03-22
celestron.com/pages/warranty