Celestron Tripod for StarSense Explorer Tabletop Dobsonian Telescopes StarSens - Page 7
Pointing The Telescope
View all Celestron Tripod for StarSense Explorer Tabletop Dobsonian Telescopes manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
POINTING THE TELESCOPE Dobsonian bases are altazimuth mounts. This means that the telescope moves in two directions: up-and-down (i.e. altitude), and left-to-right (i.e. azimuth) (Figure 2). You can adjust the tension along the altitude axis by turning the knob located on the same side as the telescope's focuser-the altitude tensioning knob (Figure 4). ALTITUDE AZIMUTH Figure 2: The StarSense Explorer Dobsonians have two axes of motion: altitude (up-and-down) and azimuth (left-to-right). Pointing your Dob at an object is easy. Simply move the telescope tube up-and-down and left-to-right until the telescope is pointed toward the desired object and the object appears in the telescope's eyepiece. The panning knob at the front of the telescope tube provides a convenient place to grasp the tube for pointing (Figure 3). Using this knob also prevents heat from your hand from entering the optical path, which can temporarily distort the view. Figure 4: The tension of the altitude motion can be adjusted with the altitude tensioning knob. (NOTE: the other knob on the opposite side does not function for adjusting altitude tension.) Turn the knob to add enough tension to provide a smooth up-and-down motion. Under most circumstances you won't need to add much tension. The telescope is balanced for normal use. However, if you are using a heavy eyepiece or a larger smartphone, you may need to add more tension so that the telescope remains still when not touched. Figure 3: The panning knob provides an excellent place for your fingers to grasp when pointing the telescope. ENGLISH I 7