Cisco AS5350XM Software Configuration Guide
Cisco AS5350XM Manual
 |
View all Cisco AS5350XM manuals
Add to My Manuals
Save this manual to your list of manuals |
Cisco AS5350XM manual content summary:
- Cisco AS5350XM | Software Configuration Guide - Page 1
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide Release 12.4T Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 - Cisco AS5350XM | Software Configuration Guide - Page 2
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide © 2006, 2009 Cisco Systems, Inc. All rights reserved. - Cisco AS5350XM | Software Configuration Guide - Page 3
product or go to the Product Support area of Cisco.com at http://www.cisco.com/web/psa/products/index.html. After you have performed the initial configuration and connected the device to your network, you can configure the device by using the console port or a remote access method, such as Telnet or - Cisco AS5350XM | Software Configuration Guide - Page 4
Interface in Cisco IOS and Cisco IOS XE Software Cisco ASR1000 series router does not serve any useful customer purpose and should be accessed only under the advisement of a customer support structure is hierarchical, and each mode supports a set of specific commands. This section describes the most - Cisco AS5350XM | Software Configuration Guide - Page 5
Using the Command-Line Interface in Cisco IOS and Cisco IOS XE Software Using the CLI Table 1 CLI Command Modes Command Mode User EXEC Privileged EXEC Global configuration Interface configuration Line configuration Access Method Prompt Exit Method Mode Usage Log in. Router> Issue the - Cisco AS5350XM | Software Configuration Guide - Page 6
Replace or roll back the configuration. • Provide methods of restarting the Cisco IOS software or other processes. • Reboot hardware, such as the entire router, an RP, an ESP, a SIP, a SPA, or possibly other hardware components. • Transfer files into or off of the router using remote access methods - Cisco AS5350XM | Software Configuration Guide - Page 7
-Line Interface in Cisco IOS and Cisco IOS XE Software Using the CLI EXEC commands are not saved when the software reboots. Commands that you issue in a configuration mode can be saved to the startup configuration. If you save the running configuration to the startup configuration, these commands - Cisco AS5350XM | Software Configuration Guide - Page 8
Interface in Cisco IOS and Cisco IOS XE Software access-enable access-profile access-template alps archive Create a temporary access-List entry Apply user-profile to interface Create a temporary access must supply. Keywords and arguments may be required or optional. Specific conventions - Cisco AS5350XM | Software Configuration Guide - Page 9
level number Router(config)# ethernet cfm domain dname level 7 ? Router(config)# snmp-server file-transfer access-group 10 ? protocol protocol options Router(config)# logging host ? Hostname or A.B.C.D IP address of the syslog server ipv6 Configure IPv6 syslog server Router - Cisco AS5350XM | Software Configuration Guide - Page 10
and not as part of your password. When both passwords are set, the enable secret password takes precedence over the enable password. To remove a password, use the no form of the commands: no enable password or no enable secret password. For more information about password recovery procedures for - Cisco AS5350XM | Software Configuration Guide - Page 11
IOS Release 12.4(13)T.) Using Aliases for CLI Commands To save time and the repetition of entering the same command multiple times, you can use a command alias. An alias can be configured to do anything that can be done at the command line, but an alias cannot move between modes, type in passwords - Cisco AS5350XM | Software Configuration Guide - Page 12
Configuration Cisco IOS Debug Command Reference at http://www.cisco.com/en/US/docs/ios/debug/command/reference/db_book.html. Caution Debugging is a high priority and high CPU utilization process that can render your device unusable. Use debug commands only to troubleshoot specific problems - Cisco AS5350XM | Software Configuration Guide - Page 13
-sensitive alphanumeric pattern. It can be a single character or number, a phrase, or a more complex string. The following example Cisco IOS Release 12.2SR System Message Guide • Cisco IOS System Messages, Volume 1 of 2 (Cisco IOS Release 12.4) • Cisco IOS System Messages, Volume 2 of 2 (Cisco IOS - Cisco AS5350XM | Software Configuration Guide - Page 14
/ios/fundamentals/configuration/guide/cf_cli-basics.html or "Using Cisco IOS XE Software" chapter of the Cisco ASR1000 Series Aggregation Services Routers Software Configuration Guide: http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/using_cli.html • Cisco Product Support - Cisco AS5350XM | Software Configuration Guide - Page 15
of Cisco IOS commands (requires Cisco.com user ID and password) http://tools.cisco.com/Support/CLILookup • Output Interpreter, a troubleshooting tool that analyzes command output of supported show commands https://www.cisco.com/pcgi-bin/Support/OutputInterpreter/home.pl CCDE, CCENT, Cisco Eos, Cisco - Cisco AS5350XM | Software Configuration Guide - Page 16
Additional Information Using the Command-Line Interface in Cisco IOS and Cisco IOS XE Software xiv - Cisco AS5350XM | Software Configuration Guide - Page 17
) but who may not be familiar with the configuration and maintenance tasks, the relationship among tasks, or the Cisco IOS commands necessary to perform particular tasks. The Cisco IOS documentation set is also intended for those users experienced with Cisco IOS who need to know about new features - Cisco AS5350XM | Software Configuration Guide - Page 18
Cisco IOS and Cisco IOS XE Software Documentation Documentation Conventions In Cisco IOS documentation, the term router may be used to refer to various Cisco products; for example, routers, access servers, and switches. These and other networking devices that support Cisco IOS you supply values. - Cisco AS5350XM | Software Configuration Guide - Page 19
that is not displayed, such as a password. Angle brackets also are used in contexts in which the italic font style is not supported; for example, ASCII text. ! An Cisco IOS documentation set, how it is organized, and how to access it on Cisco.com. Included are lists of configuration guides, - Cisco AS5350XM | Software Configuration Guide - Page 20
the related configuration guides. For each technology, there is a single command reference that covers all Cisco IOS releases and that is updated at each standard release. • Lists of all the commands in a specific release and all commands that are new, modified, removed, or replaced in the release - Cisco AS5350XM | Software Configuration Guide - Page 21
for all releases. The configuration guides and command references support many different software releases and platforms. Your Cisco IOS software release or platform may not support all these technologies. For additional information about configuring and operating specific networking devices, go to - Cisco AS5350XM | Software Configuration Guide - Page 22
), Cisco IOS web browser user interface (UI), basic file transfer services, and file management. DECnet protocol. Asynchronous communications, dial backup, dialer technology, dial-in terminal services and AppleTalk remote access (ARA), large scale dialout, dial-on-demand routing, dialout, modem and - Cisco AS5350XM | Software Configuration Guide - Page 23
Reference Cisco IOS IP Multicast Configuration Guide Cisco IOS XE IP Multicast Configuration Guide Cisco IOS IP Multicast Command Reference Features/Protocols/Technologies Gatekeeper enhancements for managed voice services, Gatekeeper Transaction Message Protocol, gateway codec order preservation - Cisco AS5350XM | Software Configuration Guide - Page 24
URL: http://www.cisco.com/en/US/docs/ios/ipv6/configuration/ guide/ip6-roadmap.html ISO connectionless network service (CLNS). VLANs, Inter-Switch Link (ISL) encapsulation, IEEE 802.10 encapsulation, IEEE 802.1Q encapsulation, and multilayer switching (MLS). Cisco IOS Gateway GPRS Support Node (GGSN - Cisco AS5350XM | Software Configuration Guide - Page 25
Management Configuration Guide Cisco IOS Network Management Command Reference Basic system management; system monitoring and logging; troubleshooting, logging, and fault management; Cisco Discovery Protocol; Cisco IOS Scripting with Tool Control Language (Tcl); Cisco networking services (CNS - Cisco AS5350XM | Software Configuration Guide - Page 26
Titles Features/Protocols/Technologies Cisco IOS Service Selection Gateway Configuration Guide Subscriber authentication, service access, and accounting. Cisco IOS Service Selection Gateway Command Reference Cisco IOS Software Activation Configuration Guide Cisco IOS Software Activation Command - Cisco AS5350XM | Software Configuration Guide - Page 27
and Caveats MIBs RFCs Description Alphabetical list of all the commands documented in all Cisco IOS releases. List of all the new, modified, removed, and replaced commands for a Cisco IOS release. List of Cisco IOS system messages and descriptions. System messages may indicate problems with your - Cisco AS5350XM | Software Configuration Guide - Page 28
IOS XE Software Documentation CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access - Cisco AS5350XM | Software Configuration Guide - Page 29
page 14 The Cisco AS5350XM and Cisco AS5400XM universal gateways are versatile data and voice communications platforms that provide the functions of a gateway, router, and digital modems in a single modular chassis. The gateways are intended for Internet service providers (ISPs), telecommunications - Cisco AS5350XM | Software Configuration Guide - Page 30
interface channels S0:1, S0:2... TDM bus T1 controllers PRI lines POTS line Client PC Client modem BRI line V ISDN router Client PC Legend = Synchronous PPP = Asynchronous PPP = Configuration template 56092 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 2 - Cisco AS5350XM | Software Configuration Guide - Page 31
for reading or writing data (such as NVRAM, modem firmware, the running configuration, ROM, raw system memory and flash load helper log) Note The Cisco AS5350XM and Cisco AS5400XM universal gateways use a Class C Flash File System. IFS first appeared in Cisco IOS Releases 11.3 AA and 12.0. For more - Cisco AS5350XM | Software Configuration Guide - Page 32
system: Directory of system:/ 4 dr-x 1 -rw2 dr-x 14 dr-x 0 5026 0 0 memory running-config ucode vfiles Note Remember to include the trailing colon (:) in dir commands. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 4 - Cisco AS5350XM | Software Configuration Guide - Page 33
. Getting Help Use the question mark (?) and arrow keys to help you enter commands, where Router> is the prompt for the top level of the Cisco IOS software for the Cisco AS5350XM or Cisco AS5400XM universal gateway. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 34
displays options available with the command. For example, if you were in global configuration mode, typed the command arap, and wanted to see all the keywords and arguments for that command, you would type arap ? Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 35
configure the channel-associated signaling on a T1 controller. Router(config-controller)# ds0-group 1 ? Displays the only command (timeslots) timeslots List of timeslots in the ds0-group available in ds0-group 1. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 36
changes to nonvolatile random-access memory (NVRAM) so that they are not lost if there is a system reload or power outage. For example: Router# copy running-config startup-config Building configuration... Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 8 - Cisco AS5350XM | Software Configuration Guide - Page 37
the flash memory to make room for the new image. Enter the delete flash:version command, followed by the squeeze flash command, to perform this delete-and-squeeze operation. Then proceed with the copy operation. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 9 - Cisco AS5350XM | Software Configuration Guide - Page 38
to 0xXXX2, where 2 tells the system to use the "boot system" command. If the configuration register is set to 0xXXX1, the system will ignore the boot system command and will load the first image on flash memory. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 10 - Cisco AS5350XM | Software Configuration Guide - Page 39
line speed. • Change your terminal server speed. • If the above two solutions do not correct the console session, install the console jumper on the motherboard to set your default console port speed to 9600 bps. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 11 - Cisco AS5350XM | Software Configuration Guide - Page 40
change the terminal server port speed through your console port connection until the rommon> prompt is displayed. See Appendix B, "ROM Monitor." Changing Gateway Line Speed The following example shows how to configure line speed on a Cisco AS5350XM or Cisco AS5400XM universal gateway, beginning in - Cisco AS5350XM | Software Configuration Guide - Page 41
before doing any additional resets or power cycling. If the ROM monitor image from a TFTP server using a TFTP path procedure if you want to replace the upgrade ROM monitor image password if prompted. When in Cisco IOS Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 42
IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 43
Understanding Basic Hardware Architecture and Cisco IOS Software Where to Go Next HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, and coincidental. © 2006, 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 15 - Cisco AS5350XM | Software Configuration Guide - Page 44
Where to Go Next Understanding Basic Hardware Architecture and Cisco IOS Software Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 16 - Cisco AS5350XM | Software Configuration Guide - Page 45
ports (labeled GE0 and GE1 on the chassis). The Cisco IOS firmware and software is designed so that configurations for Fast Ethernet will work on the Cisco AS5350XM and AS5400XM universal gateways without requiring any modification by the user. If the Cisco IOS commands, write or copy running-config - Cisco AS5350XM | Software Configuration Guide - Page 46
/131072K bytes of memory. Processor board ID JAB082904P4 SB-1 CPU at 750MHz, Implementation 1025, Rev 0.3, 256KB L2 Cache Last reset from IOS reload Manufacture Cookie Info: EEPROM Version 0x4, Board ID 0x4BD, Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 2 - Cisco AS5350XM | Software Configuration Guide - Page 47
restarted -Cisco Internetwork Operating System Software IOS (tm) 5400 Software (C5400-JS-M), Version 12.3(14)T, RELEASE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 2004 by cisco Systems, Inc. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 3 - Cisco AS5350XM | Software Configuration Guide - Page 48
-js-mz.xm.Feb19" cisco AS5400 (R7K) processor (revision L) with 131072K/65536K bytes of memory. Processor board ID 99290068 21, Item Number 800-5171-01, Board Revision 011, Serial Number 99290068, PLD/ T1/PRI port(s) Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 49
rate-limit console 10 except errors ! ! resource-pool disable ! ! voice-fastpath enable ip subnet-zero no ip routing no ip finger ip name-server 172.16.11.48 ip name-server 172.16.2.132 ip name-server 172.16.2.133 ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 50
clockrate 2000000 ! interface Async4/00 no ip address no ip route-cache ! interface Async4/01 no ip address no ip route-cache ! interface Async4/02 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 Verifying Basic Setup - Cisco AS5350XM | Software Configuration Guide - Page 51
4/107 no flush-at-activation modem InOut ! scheduler allocate 10000 400 end The Cisco AS5350XM or Cisco AS5400XM universal gateway displays every asynchronous interface it recognizes. Therefore, if your system has a large number of asynchronous interfaces, the running configuration will be very long - Cisco AS5350XM | Software Configuration Guide - Page 52
information bases (MIBs), see the online references at http://www.cisco.com/univercd/cc/td/doc/product/software/. Select your Cisco IOS release and 5Min TTY Process 43 0 3 0 0.00% 0.00% 0.00% 0 AAA Accounting . Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 8 - Cisco AS5350XM | Software Configuration Guide - Page 53
1 1 0 4444444444444444444449444440 100 * 90 * 80 * 70 * 60 * 50 * 40 * 30 * 20 * * 10 * * 0....5....1....1....2....2....3....3....4....4....5....5....6....6....7. 0 5 0 5 0 5 0 5 0 5 0 5 0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 9 - Cisco AS5350XM | Software Configuration Guide - Page 54
high utilization numbers in the universal gateway. The show health-monitor summary command shows the status of the following components: • Chassis: Power supply, temperature, fans • Memory: Processor, I/O memory Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 10 - Cisco AS5350XM | Software Configuration Guide - Page 55
output: Step 1 Enable the Interface Queue Wedge Monitor. AS5400# configure terminal Enter configuration commands, one per line. AS5400#(config)# interface-monitor enable AS5400#(config)# ^Z End with CNTL/Z. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 11 - Cisco AS5350XM | Software Configuration Guide - Page 56
Intf Wedge Monit Disable the interface monitor. AS5400# configure terminal Enter configuration commands, one per line. End with CNTL/Z. AS5400#(config)# no interface-monitor enable AS5400# Show wedge output. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 57
Intf Wedge Monit Disable the interface monitor. AS5400# configure terminal Enter configuration commands, one per line. End with CNTL/Z. AS5400#(config)# no interface-monitor show proc cpu | i Intf AS5400# AS5400# Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 58
online at Cisco.com. For more advanced configuration topics, see the Cisco IOS software configuration guide, feature modules, and command reference publications that pertain to your Cisco IOS software release. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 14 - Cisco AS5350XM | Software Configuration Guide - Page 59
included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. © 2006, 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 15 - Cisco AS5350XM | Software Configuration Guide - Page 60
Where to Go Next Verifying Basic Setup Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 16 - Cisco AS5350XM | Software Configuration Guide - Page 61
chapter describes how to use the Cisco IOS software command-line interface (CLI) to commission your Cisco AS5350XM or Cisco AS5400XM universal gateway and includes the following tasks: • Configuring the Hostname, Password, and Time Stamps, page 2 • Configuring Local AAA Security, page 3 • Creating - Cisco AS5350XM | Software Configuration Guide - Page 62
debugging messages to include milliseconds in the date and time stamp. AS5400(config)# service timestamps log datetime msec Enters time-stamp logging messages to include milliseconds in the date and time stamp. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 2 - Cisco AS5350XM | Software Configuration Guide - Page 63
the local username database. The login keyword authenticates EXEC shell users. Additionally, configure PPP authentication to use the local database if the session was not already authenticated by the login keyword. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 3 - Cisco AS5350XM | Software Configuration Guide - Page 64
Local AAA Security Basic Configuration Using the Command-Line Interface AAA (called triple A) is the Cisco IOS security model used on all Cisco devices. AAA provides the primary framework through which you set up access control on the Cisco AS5350XM or Cisco AS5400XM universal gateway. The same - Cisco AS5350XM | Software Configuration Guide - Page 65
example, and create an IP route to the default gateway: AS5400(config)# interface loopback 0 AS5400(config-if)# ip address 172.22.99.1 255.255.255.255 AS5400(config-if)# exit AS5400(config)# interface loopback 1 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 66
need to be aggregated. This can be determined from the running configuration. Notice that in the "Checking the Initial Running Configuration" section on page 5, the asynchronous lines are numbered from 0 to 107. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 67
/drops) Conversations 0/1/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 86 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 7 - Cisco AS5350XM | Software Configuration Guide - Page 68
168.10.100 *7/107 192.168.10.100 Remote Qd None 0 None 0 None 0 None Configuring T1 and E1 Feature Cards On a Cisco AS5350XM or Cisco AS5400XM universal gateway, you can allocate the available channels for channelized T1 and E1 lines in the following ways: • Configure all channels to support - Cisco AS5350XM | Software Configuration Guide - Page 69
see the Cisco IOS Configuration Fundamentals Configuration Guide for your software release. Note You can install a maximum of two T1 feature cards, two E1 feature cards, or one channelized T3 (CT3) feature card in a single Cisco AS5350XM or Cisco AS5400XM chassis. Controller Numbering The T1 and E1 - Cisco AS5350XM | Software Configuration Guide - Page 70
service provider. • Another common reason for failure is the dial-tdm-clock priority setting. The default setting is a free-running clock that causes clock slip problems if not set properly. (See the "Configuring Clocking" section on page 30.) Cisco AS5350XM and Cisco AS5400XM Universal Gateways - Cisco AS5350XM | Software Configuration Guide - Page 71
1 port 0. Slot values range from 1 to 7. Port number is always 0. Enters the telco framing type: c-bit or m23. Enters line clock source: internal or line. Enters your cable length: values range from 0 to 450 feet. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 11 - Cisco AS5350XM | Software Configuration Guide - Page 72
for user data. Channelized T1 ISDN PRI offers 23 B channels and 1 D channel. Channelized E1 ISDN PRI offers 30 B channels and 1 D channel. Channel 24 is the D channel for T1, and channel 16 is the D channel for E1. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 73
card slot numbering starts from the motherboard and works up from left to right. Slot 0 is reserved for the motherboard. Feature card slots are numbered sequentially from 1 to 7. Port number value is always 0. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 74
the line code as binary 8 zero substitution (B8ZS) for the T1 or CT3 feature card. or AS5400(config-controller)# linecode hdb3 Defines the line code as high-density bipolar 3 (HDB3) for the E1 feature card. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 14 - Cisco AS5350XM | Software Configuration Guide - Page 75
otherwise your controller might go down frequently. This could indicate switch problems. AS5400# show controller t3 1/0 T3 1/0 is up. Applique type is Channelized T3 No alarms detected. MDL transmission is disabled Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 15 - Cisco AS5350XM | Software Configuration Guide - Page 76
show controller t1 command and specify the slot and port numbers. AS5400# show controller t1 1/0 T1 1/0 is up. Applique type is Channelized T1 Cablelength is long primary-5ess Layer 1 Status: ACTIVE Layer 2 Status: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 16 - Cisco AS5350XM | Software Configuration Guide - Page 77
Busy 3=Reserved 4=Restart 5=Maint) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 0 3 3 3 3 3 3 3 3 Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 78
(1-31) Service (0=Inservice 1=Maint 2=Outofservice) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2 Note Your Cisco AS5350XM or Cisco AS5400XM universal gateway supports a total of 248 ISDN channels per ingress trunk feature card. If you are configuring individual T1 channels of - Cisco AS5350XM | Software Configuration Guide - Page 79
configuration) or the hunt scheme configured. Using trunk groups simplifies the task of configuring dial peers and interfaces, and also enables the dynamic selection of interfaces as needed in the access server. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 80
T1 3 AS5400(config-controller)# framing esf AS5400(config-controller)# clock source line secondary 3 AS5400(config-controller)# linecode b8zs AS5400(config-controller)# pri-group timeslots 1-24 AS5400(config-controller)# ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration - Cisco AS5350XM | Software Configuration Guide - Page 81
= 0, Free = 23 advertise_flag 0x00000040, capacity timer 25 sec tripl_config_mask 0x00000000 AC_curr 24, FD_curr 0, SD_curr 0 succ_curr 0 tot_curr 0 succ_report 0 tot_report 0 changed 0 replacement position 0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 21 - Cisco AS5350XM | Software Configuration Guide - Page 82
S0:22 S0:23 Logical contents of a PRI interface 35765 Note When you configure your T1 controller for an NFAS backup D channel, a serial interface is automatically created only when your primary D channel fails. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 22 - Cisco AS5350XM | Software Configuration Guide - Page 83
0/40, 0 drops; input queue 0/75, 0 drops 1 minute input rate 0 bits/sec, 0 packets/sec 1 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 23 - Cisco AS5350XM | Software Configuration Guide - Page 84
are having trouble: • Modem pass-through calls are not included in dial services. One SPE provides services for six ports, with additional ports per SPE. Busyout and shutdown can be configured at the SPE or port level. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 85
Cisco IOS upgrades, and different firmware versions can be configured to run on SPEs in the same feature card. The universal port and dial-only feature cards support the modem standards and features listed in Table 6. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 86
. You are in privileged EXEC mode when the prompt changes to AS5350# or AS5400#. Enters global configuration mode. You are in global configuration mode when the prompt changes to AS5350(config)# or AS5400(config)#. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 26 - Cisco AS5350XM | Software Configuration Guide - Page 87
the default settings for integrated modems. Resetting to Default Values for Country Codes To reset the modem to default settings for country codes, enter the no spe country command in global configuration mode. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 27 - Cisco AS5350XM | Software Configuration Guide - Page 88
Disconnect Activation ^^x none - - none Timeouts: Idle EXEC Idle Session Modem Answer Session 00:10:00 never none Idle Session Disconnect Warning never Login-sequence User Response Dispatch not set Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 28 - Cisco AS5350XM | Software Configuration Guide - Page 89
. • Where slash marks appear in the command syntax, they are required. AS5400(config-voice-dsp)# firmware location Specifies that the firmware is in flash memory and flash:filename identifies the file name. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 29 - Cisco AS5350XM | Software Configuration Guide - Page 90
building master timing supply. BITS generally supplies DS1 and DS0 level timing throughout an office. In North America, BITS is the clock that provides and distributes timing to a wireline network's lower levels. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 30 - Cisco AS5350XM | Software Configuration Guide - Page 91
are providing the clocking source. Priority range is a value between 1 and 99. Feature card slot is a value between 1 and 7. DS1 port number controller is a value between 0 and 7. Note DS1 port specifies T1 port. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 31 - Cisco AS5350XM | Software Configuration Guide - Page 92
clocks command (this example is for T1 or E1): AS5400# show tdm clocks Primary Clock TDM Bus Master Clock Generator State = HOLDOVER Backup clocks for primary: Source Slot Port DS3-Port Priority Status State Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 32 - Cisco AS5350XM | Software Configuration Guide - Page 93
Using the Command-Line Interface Configuring Clocking Trunk cards controllers clock health information Slot Type 7 6 5 4 3 2 1 0 1 T1 B B B B B B B B Generator State = NORMAL Backup clocks for primary: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 33 - Cisco AS5350XM | Software Configuration Guide - Page 94
5 4 3 2 1 0 2 T1 B B B B G G G G CLOCK CHANGE HISTORY State Default Default CLOCK Event External Change in CLI configuration AS5400# Time 23:27:25 UTC name services for EXEC shell users, follow these steps: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 34 - Cisco AS5350XM | Software Configuration Guide - Page 95
servers. The ip name-server command is used for mapping names to IP addresses. Testing Asynchronous Shell Connections This task verifies that the following components are working: • The physical asynchronous data path Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 96
Step 3 Dial the PRI telephone number assigned to the gateway (in this example, the number is 5554100). After the modem successfully connects, a connect message appears. atdt 5554100 CONNECT 33600/REL - LAPM Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 36 - Cisco AS5350XM | Software Configuration Guide - Page 97
Trying 171.68.186.49 ... Open access-gw line 2 access-gw telnet smart Translating "smart"...domain server (171.68.10.70) [OK] Trying smart.cisco.com (171.68.191.135)... Open UNIX(r) System V Release 4.0 (smart) Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 37 - Cisco AS5350XM | Software Configuration Guide - Page 98
-type modem mta receive maximum-recipients 0 ! ! crypto mib ipsec flowmib history tunnel size 200 crypto mib ipsec flowmib history failure size 200 ! ! controller T1 1/0 framing sf linecode ami ! controller T1 1/1 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 38 - Cisco AS5350XM | Software Configuration Guide - Page 99
the Command-Line Interface Verifying the Final Running Configuration framing sf linecode ami ! . . . controller T1 1/7 framing sf linecode ami ! ! interface GigabitEthernet0 0.0.0.0 172.21.101.1 no ip http server Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 39 - Cisco AS5350XM | Software Configuration Guide - Page 100
gateway. • Chapter 6, "Managing and Troubleshooting the Voice Feature Card," to configure, manage, and troubleshoot voice feature card connections on your gateway. • Appendix C, "Comprehensive Configuration Examples." Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 101
Packet Voice Feature Card for Cisco AS5350XM and AS5400XM Universal Gateways document, available online at: http://www.cisco.com/en/US/products/ps6706/products_feature_guide09186a008060df15.html • For additional basic configuration information, see the Cisco IOS Dial Technologies Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 102
Where to Go Next Basic Configuration Using the Command-Line Interface Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 42 - Cisco AS5350XM | Software Configuration Guide - Page 103
chapter continues where the "Basic Configuration Using the Command-Line Interface" chapter ends. After you have commissioned your Cisco AS5350XM or Cisco AS5400XM universal gateway, you might want to configure other features that include serial interface support, T1 channel groups, and signaling - Cisco AS5350XM | Software Configuration Guide - Page 104
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 358 packets output, 25157 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 2 - Cisco AS5350XM | Software Configuration Guide - Page 105
example shows a T1 controller configured for channel groups and an ISDN PRI group. The pri-group command and the channel-group command cannot have overlapping time slots; note the correct time slot configuration. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 3 - Cisco AS5350XM | Software Configuration Guide - Page 106
or Cisco AS5400XM universal gateway must connect to a Primary-4ESS, Primary-DMS 100, or Primary-NI switch (see Table 5 on page 15) and must also have a channelized T1 controller and, as a result, be ISDN PRI capable. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 107
:23. There are 2 total nfas members. There are 24 total available B channels. The primary D-channel is DSL 0 in state IN SERVICE. The backup D-channel is DSL 1 in state STANDBY. The current active layer 2 DSL is 0. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 108
r2-non-compelled, and r2-semi-compelled. You can also set ani (ANI address information provisioned) for any of the above options. AS5350(config-controller-cas)# cas-custom 1 Enters the channel number to customize. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 109
active) to execute the SPE country command. Note On the Cisco AS5350XM and Cisco AS5400XM universal gateway, DS-0 companding law selection is configured for the entire system rather than on individual voice ports. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 7 - Cisco AS5350XM | Software Configuration Guide - Page 110
Line Primary. Data in current interval (785 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 8 - Cisco AS5350XM | Software Configuration Guide - Page 111
the following failure events: • Interface down • T1, E1, or T3 controller down • Modem board failure • Redundant power supply (RPS) failure • Thermal failure • Fan failure Cisco IOS software polls every second to detect the failure events that you have configured and turns on an alarm when any one - Cisco AS5350XM | Software Configuration Guide - Page 112
type and slot/port designation. AS5350(config)# facility-alarm detect controller [t1 | e1 | t3] [ AS5350# show facility-alarm Device ------ State ----- gigabitethernet 0/0 UP Modem Card 4 UP Facility Alarm is ON Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 113
guide, feature modules, and command reference publications that pertain to your Cisco IOS software release. • For troubleshooting information, see the System Error Messages and Debug Command Reference publications. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 114
included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. © 2006, 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 115
in a Cisco AS5350XM and Cisco AS5400XM universal gateway. • Dial-only feature card-The dial-only feature card supports 60 (DL-60) to 108 (DL-108) dial calls in a Cisco AS5350XM and Cisco AS5400XM universal gateway. It does not support voice or fax services. Note Dial services include modem calls - Cisco AS5350XM | Software Configuration Guide - Page 116
cannot remove individual service events from the port log. You can use show port modem log or show port digital log to display specific service events, but you must use clear port log to clear the entire port log. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 2 - Cisco AS5350XM | Software Configuration Guide - Page 117
or Cisco AS5400XM universal gateway.) • show spe modem {high | low} speed-Shows the connection speeds negotiated within each high or low speed modulation or codecs for a specific range of SPEs or all the SPEs. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 3 - Cisco AS5350XM | Software Configuration Guide - Page 118
can clear ports, remove ports from service, and disable ports from dial-up service by using port configuration mode. For details on disabling a port from dial-up service, see the "Troubleshooting" section on page 8. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 4 - Cisco AS5350XM | Software Configuration Guide - Page 119
just port 4 on card 1. Use the no form of this command to reenable the ports. This replaces the modem busyout command. Maintenance activities such as testing can still be performed while a port is in busyout mode. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 120
clearing active calls on the SPEs. SPE Country On the Cisco AS5350XM and Cisco AS5400XM universal gateways, DS0 companding law selection is configured for the entire system rather than on individual voice ports. To configure companding on your T1, E1, or T3 controller lines, you must use the spe - Cisco AS5350XM | Software Configuration Guide - Page 121
Troubleshooting the Universal Port and Dial-Only Feature Cards Managing SPEs Table 10 Country India Ireland Israel Italy Japan Malaysia Supported 0 ______ 0 0 0 ______ 0 0 0 ______ 0 0 0 ______ Call Type Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 7 - Cisco AS5350XM | Software Configuration Guide - Page 122
on an SPE, and configure a scheduled recovery of SPEs. Configure SPE Diagnostic Tests You can perform three types of diagnostic tests on your SPE modem: • SPE startup test • SPE autotest • SPE back-to-back test Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 8 - Cisco AS5350XM | Software Configuration Guide - Page 123
2/5 and a known-functioning port such as port 2/6. Enter the following command in privileged EXEC mode (the prompt is displayed as AS5350# or AS5400#) to perform internal back-to-back port tests between two ports: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 9 - Cisco AS5350XM | Software Configuration Guide - Page 124
You can configure automatic recovery (removal from service and reloading of SPE firmware) of ports on an SPE at any available time from global configuration mode (the prompt is AS5350(config)# or AS5400(config)#): Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 10 - Cisco AS5350XM | Software Configuration Guide - Page 125
can acquire new SPE firmware from the Cisco Software Center in one of two ways: • Bundled in regular Cisco IOS releases. See the "Using SPE Firmware Bundled with Cisco IOS Software" section on page 19 for details. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 11 - Cisco AS5350XM | Software Configuration Guide - Page 126
memory, and bundled with Cisco IOS software. This helps you decide if you need to change the version running on the modems. Note The version number IOS-Bundled Default Firmware-Filename Version Firmware-Type Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 127
Center home page at the following URL (subject to change without notice): http://www.cisco.com/kobayashi/sw-center/ Under Software Products & Downloads, click Access Software. Click AS5350 Series or AS5400 Series. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 128
***** 230- ***** different machine, which is now known as ***** 230- ***** "ftpeng.cisco.com" or "ftp-eng.cisco.com". ***** 230- ***** ***** 230- ***** In general, "ftpeng.cisco.com" is used only for ***** Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 14 - Cisco AS5350XM | Software Configuration Guide - Page 129
program. 230- Please send any questions, comments, or problem reports about this 230- server to [email protected]. 230- 230- NOTE: 230- o To download gateway to your local environment with the get command. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 15 - Cisco AS5350XM | Software Configuration Guide - Page 130
System flash (Read/Write) Enter the copy tftp flash command to download the code file from the TFTP server into the gateway flash memory. You are prompted for the download destination and the remote host name. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 16 - Cisco AS5350XM | Software Configuration Guide - Page 131
memory. Note As explained previously, the version number and UPG firmware filename may not match until the upgrade is complete. AS5400# show spe version IOS-Bundled Default Firmware-Filename Version Firmware-Type Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 132
are in SPE configuration mode when the prompt changes to AS5350(config-SPE)# or AS5400(config-SPE)#. Step 6 Step 7 Specify the SPE firmware file in flash memory to use for config mode. AS5400(config-SPE)# exit Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 18 - Cisco AS5350XM | Software Configuration Guide - Page 133
form of the firmware location command to revert to the default Cisco IOS bundled SPE firmware: AS5400(config-SPE)# no firmware location Type the exit command to exit SPE configuration mode. AS5400(config-SPE)# exit Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 19 - Cisco AS5350XM | Software Configuration Guide - Page 134
product/access/acs_serv/as5350/sw_conf/alxnxpt.htm. • Managing Port Services on the Cisco AS5400 Universal Gateway, available online at http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/nextport/i ndex.htm. • For more advanced configuration topics, see the Cisco IOS - Cisco AS5350XM | Software Configuration Guide - Page 135
included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. © 2006, 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 21 - Cisco AS5350XM | Software Configuration Guide - Page 136
Where to Go Next Managing and Troubleshooting the Universal Port and Dial-Only Feature Cards Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 22 - Cisco AS5350XM | Software Configuration Guide - Page 137
channel level by using monitoring and troubleshooting commands. On the Cisco AS5350XM and Cisco AS5400XM universal gateways, the hierarchy designation is slot/dsp and slot/channel. You can perform the following functions on a voice feature card: • General configuration such as busyout, shutdown, or - Cisco AS5350XM | Software Configuration Guide - Page 138
demonstrates how to enter DSP configuration mode: AS5400# configure terminal Enter configuration commands, one per line. AS5400(config)# voice dsp slot/dsp slot/dsp AS5400(config-voicedsp)# End with CNTL/Z. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 2 - Cisco AS5350XM | Software Configuration Guide - Page 139
recovery (removal from service and reloading of DSP firmware) is enabled by default for the voice feature card. You can disable automatic recovery using the voice dsp recovery disabled command in configuration mode. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 140
memory under different filenames. • Use the firmware location command in DSP configuration mode to transfer a specified version of DSP firmware from system flash memory to the DSPs specified in DSP configuration mode. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 141
transferred to all DSPs that are not specifically configured for a different DSP firmware file. This procedure is only necessary if you are using DSP firmware that is not bundled with the Cisco IOS software release. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 142
mode. AS5400(config-voicedsp)# exit AS5400(config)# Press the Enter key to make the changes, and then type Ctrl-Z to return to privileged EXEC mode. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 143
bundled with the current Cisco IOS image. AS5400(config)# voice dsp slot/dsp or AS5400(config)# voice dsp slot/dsp slot/dsp You are in DSP configuration mode when the prompt changes to AS5400(config-voicedsp)#. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 7 - Cisco AS5350XM | Software Configuration Guide - Page 144
to access the DSPWare that supports the AMR-NB codec. It is recommended that you purchase a Cisco SMARTnet contract in order to streamline the process of getting the AMR-NB codec DSPWare. When obtaining your license, use the following part numbers: FR535XM-AMR-LIC for the Cisco AS5350XM FR54XM - Cisco AS5350XM | Software Configuration Guide - Page 145
Next At this point you can go to these references: • Chapter 7, "Configuring Voice over IP," to learn how to configure voice and fax traffic over an IP network. • Appendix C, "Comprehensive Configuration Examples" Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 9 - Cisco AS5350XM | Software Configuration Guide - Page 146
Density Packet Voice Feature Card for Cisco AS5350XM and AS5400XM Universal Gateways document, available online at: http://www.cisco.com/en/US/products/ps6706/products_feature_guide09186a008060df15.html • For more advanced configuration topics, see the Cisco IOS software configuration guide, feature - Cisco AS5350XM | Software Configuration Guide - Page 147
Managing and Troubleshooting the Voice Feature Card Where to Go Next Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 11 - Cisco AS5350XM | Software Configuration Guide - Page 148
Where to Go Next Managing and Troubleshooting the Voice Feature Card Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 149
Managing and Troubleshooting the Voice Feature Card Where to Go Next Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 150
Where to Go Next Managing and Troubleshooting the Voice Feature Card Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 14 - Cisco AS5350XM | Software Configuration Guide - Page 151
the gateway to distinguish between voice and modem calls (necessary when the network-access server supports both modem dialup and VoIP users on the same POTS interface) • Optimize dial-peer and network-interface configurations • Configure VoIP for Microsoft NetMeeting Americas Headquarters: Cisco - Cisco AS5350XM | Software Configuration Guide - Page 152
port or voice feature card into the appropriate slot of your Cisco AS5350XM or Cisco AS5400XM universal gateway. The number of ports or channels available for sending VoIP data depends on the capacity of your card. For more information, see Chapter 5, "Managing and Troubleshooting the Universal Port - Cisco AS5350XM | Software Configuration Guide - Page 153
that can complete the call). • Initiates H.323 session across network. • Processes voice signals and sends packets over network. As appropriate, sends call-progress and other in-band signals. • Ends session. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 3 - Cisco AS5350XM | Software Configuration Guide - Page 154
of local significance only, number is the full E.164 phone number of the associated endpoint, and data address is the address to which the gateway sends a call whose destination pattern matches the one in the peer. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 4 - Cisco AS5350XM | Software Configuration Guide - Page 155
-peer 4, whose destination pattern matches the dialed digits. 3. Sends the call out the port specified by that dial peer (port 1/0:3, which connects to extension 6000). Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 156
dialing transparent to users by, for example, avoiding such inconveniences as secondary dial tones. • Contact your PBX vendor to learn how to reconfigure PBX interfaces. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 157
Basic VoIP Configure Signaling on Voice Ports The Cisco AS5350XM and Cisco AS5400XM universal gateways process and manage digital voice calls on the universal port or voice feature card. They support voice configuration on channelized T1, E1, and T3 trunk interfaces. Your universal gateway supports - Cisco AS5350XM | Software Configuration Guide - Page 158
peers. Sets incoming called number. Prepends info digits to the calling number. Sets information type for dial peer. Sets maximum connections per peer; "no" sets to unlimited. Negates a command or sets its defaults. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 8 - Cisco AS5350XM | Software Configuration Guide - Page 159
number. Transports DTMF digits across IP link. Exits dial-peer configuration mode. Sets expectation factor for voice quality. Configures fax service. party numbering type. Configures preference order of the peer. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 9 - Cisco AS5350XM | Software Configuration Guide - Page 160
tie breaker among those matches. Tip For more information, see Voice over IP for the Cisco AS5300, available online at http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t3/voip5300/ Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 10 - Cisco AS5350XM | Software Configuration Guide - Page 161
Step 1 enable Step 2 Example: Router> enable configure terminal Example: Router# configure terminal Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters global configuration mode. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 11 - Cisco AS5350XM | Software Configuration Guide - Page 162
. The following example shows how to enable Nextport control over the echo canceller by creating a Voicecap entry and applying it to the voice port. 1. Create Voicecap entries by entering the following CLI command: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 163
voice-port 3/0 router(config-voiceport)# voicecap configure npecho_ctrl router(config-voiceport)# end Note The Voicecap must be applied to the voice port. The Cisco IOS number When the default configuration values Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 164
Configuring Basic VoIP Configuring Voice over IP 5350-torpedo# Address : 0x3000000 *Apr 26 21:40:51.735: Trace Event: 0x2 * :40:51.739: Address : 0x3000000 5350-torpedo#*Apr 26 21:40:51.739: Trace Event: 0x2 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 14 - Cisco AS5350XM | Software Configuration Guide - Page 165
, and technologies, all at reasonable cost and effort. QoS features enable you to balance service levels for user satisfaction, granting priority service to voice while servicing data transmission to the degree of Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 15 - Cisco AS5350XM | Software Configuration Guide - Page 166
Tip Should you have problems with QoS, try adding the following commands to your configuration: • At the top-level configuration level: io-cache enable voice-fastpath enable • Under the Gigabit Ethernet interface: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 16 - Cisco AS5350XM | Software Configuration Guide - Page 167
and configuration options, see the following: • VoIP over PPP Links with Quality of Service (LLQ / IP RTP Priority, LFI, cRTP), available online at http://www.cisco.com/warp/public/788/voice-qos/voip-mlppp.html Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 17 - Cisco AS5350XM | Software Configuration Guide - Page 168
interleaving voice packets among the fragments reduces jitter and delay. Use fragmentation and interleaving in conjunction with a congestion-management technique such as IP RTP Priority, RSVP, or both if you have Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 18 - Cisco AS5350XM | Software Configuration Guide - Page 169
AS5400XM universal gateways offer multiple codec (coders/decoder) methodologies for encoding (digitizing and, optionally, compressing) voice: • G.711 • G.723.1 • G.726 • G.729 • G.729a • G.729ab • G.729b • GSMAMR-NB Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 19 - Cisco AS5350XM | Software Configuration Guide - Page 170
does not exceed 200 ms. If your network uses a variety of gateway and router types, you may need to ensure that payload sizes are set both optimally (so as not to incur excessive end-to-end delay) and consistently. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 20 - Cisco AS5350XM | Software Configuration Guide - Page 171
a brief overview on this very complex subject. The following sources provide more information: • Cisco documents on IP telephony solutions: http://www.cisco.com/univercd/cc/td/doc/product/voice/ip_tele/index.htm Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 21 - Cisco AS5350XM | Software Configuration Guide - Page 172
York: McGraw-Hill; 2000. • VoIP references for Cisco devices: - Voice-over-IP Quick Start Guide, available online at http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/voipqsg.htm - Cisco IOS Voice Configuration Library, available online at http://www.cisco.com/univercd/cc/td/doc - Cisco AS5350XM | Software Configuration Guide - Page 173
that has been added in Cisco IOS Release 12.4(24)T on Cisco VGD 1T3, Cisco AS5350XM, and AS5400XM voice gateways. These features enhance performance of the voice gateways. Finding Feature Information in This Module Your Cisco IOS software release may not support all of the features documented - Cisco AS5350XM | Software Configuration Guide - Page 174
• Voice Trunk Conditioning and Trunk Conditioning OOS, page 190 • Enhanced Multifrequency Signaling for Feature Group D (E911), page 190 • Call Progress Analysis, page 191 • T.38 Fax Relay Statistics, page 192 186 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 175
, or order products. To enable the media forking feature on the Cisco AS5350XM, Cisco AS5400XM, and Cisco VGD 1T3 voice gateways, enter the media forking command in dial-peer configuration mode, voice-service voip configuration mode or global configuration mode: dial-peer voice xxx voip media - Cisco AS5350XM | Software Configuration Guide - Page 176
may not indicate that it is a modem. In this case, the originating gateway assumes that it is a fax pass-through call. Figure 1 shows a topology and sequence for modem pass-through call flow through a protocol. 188 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 177
Modem training Modem pass-through call established Access Server/ Modems Modem tone Modem T1 • Select the codec g711 ulaw redundancy keywords to use packet redundancy for modem traffic (in compliance with RFC 2198) Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 178
enhances the 911 interconnect capabilities of Cisco IOS-based gateways. This document describes E911 support requirements, which include support for Enhanced Multifrequency signaling for Feature Group D and 190 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 179
the minimum silent duration after active speech is detected in order for the CPA algorithm to determine that a call is answered by a live person. The default value is 375 ms. - cpa timing term-tone 1 ... 60000 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 191 - Cisco AS5350XM | Software Configuration Guide - Page 180
command in global configuration mode. The fax relay VSAs can be individually enabled by using an accounting template. If no template is used, all fax relay VSAs will be sent when gateway accounting is enabled. 192 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 181
found at the following URL: http://www.cisco.com/go/mibs RFCs RFC RFC 2198 RFC 2865 RFC 2866 Title RTP Payload for Redundant Audio Data Remote Authentication Dial In User Service (RADIUS) RADIUS Accounting Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 193 - Cisco AS5350XM | Software Configuration Guide - Page 182
release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature. 194 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 183
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. © 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 195 - Cisco AS5350XM | Software Configuration Guide - Page 184
Feature Information for Voice Enhancement Features for Cisco IOS Release 12.4(24)T Voice Enhancement Features for Cisco IOS Release 12.4(24)T 196 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 185
chapter describes how to power up the Cisco AS5350XM and Cisco AS5400XM universal gateways and configure them using the prompt-driven setup script (also called the System Configuration dialog). If you prefer to configure the gateway manually, go to the "Exploring Cisco IOS Software" section on page - Cisco AS5350XM | Software Configuration Guide - Page 186
Getting Started Cisco AS5350XM or Cisco AS5400XM with AS54-DFC-CT3 To use the setup script on the gateway configuring an AS54-DFC-CT3 trunk card and five AS54-DFC-108NP universal port cards, take the following steps. Step 1 Power up the gateway. The power switch is on the rear panel, at the upper - Cisco AS5350XM | Software Configuration Guide - Page 187
-Address unassigned unassigned unassigned unassigned OK? Method Status NO unset up NO unset up NO unset down NO unset down Protocol up down down down Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 3 - Cisco AS5350XM | Software Configuration Guide - Page 188
of the access server configure all controllers. Controller CT3 0,1...etc in software corresponds to Port 0,1...etc on the back of the access server. PRI configuration can be configured to controllers all at once Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 4 - Cisco AS5350XM | Software Configuration Guide - Page 189
corresponding to the signaling type to support modem pooling over the T1 lines, or press Enter to configure digital number identification service (DNIS). Do you want to provision DNIS address information? [yes]: yes Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 190
steps. Step 1 Power up the gateway. The power switch is on the rear panel, at the upper right corner near the power cord, as shown in Figure 7. Messages begin to appear in your terminal emulation program window. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 191
)T, Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Sat 29-Jan-05 02:10 by yiyan Image text-base: 0x60011068, data-base: 0x61F80000 RELEASE SOFTWARE (fc1) Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 7 - Cisco AS5350XM | Software Configuration Guide - Page 192
password, with some older software versions, and some boot images. Enter an enable password. This password is not encrypted (less secure) and can be seen when you view the configuration. Enter enable password: guessme Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 193
controller parameters: Step 13 Press Enter for every slot, port, and channel. Configuring controller T1 1/0: Configuring PRI on this controller. Configuring controller T1 1/1: Configuring PRI on this controller. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 9 - Cisco AS5350XM | Software Configuration Guide - Page 194
cards and five AS54-DFC-108NP universal port cards, take the following steps. Step 1 Power up the gateway. The power switch is on the rear panel, at the upper right corner near the power cord, as shown in Figure 8. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 10 - Cisco AS5350XM | Software Configuration Guide - Page 195
cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, 5400 Software (C5400-JS-M), Version 12.3(14)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 196
: Enter host name [Router]: AS5400 The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 197
controller. Step 12 Enter the number of controllers you will be using for the PRI configuration, or press Enter to configure all controllers. Enter # of controllers, you will be using for PRI configuration [16]: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 198
command script. Go to the next section, "Save the Configuration File." Save the Configuration File To save the configuration file, follow these steps: Step 1 Enter 0, 1, or 2 when the following prompt is displayed: Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 14 - Cisco AS5350XM | Software Configuration Guide - Page 199
-step instructions to configure the gateway manually. You can also refer to the following documents for more advanced configuration topics: • Cisco IOS software configuration guide • Command reference publications • Dial Solutions Configuration Guide • Dial Solutions Command Reference Cisco AS5350XM - Cisco AS5350XM | Software Configuration Guide - Page 200
included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. © 2006, 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 16 - Cisco AS5350XM | Software Configuration Guide - Page 201
applies to the Cisco AS5350XM and Cisco AS5400XM universal gateways. This chapter describes the Cisco AS5350XM and Cisco AS5400XM ROM monitor, the first software to run when the gateway is powered-up or reset. The ROM monitor can help you isolate or rule out hardware problems encountered when - Cisco AS5350XM | Software Configuration Guide - Page 202
the memory-related commands are assumed to Aliasing The ROM monitor supports command aliasing modeled on remain intact across periods of no power. These are some of the set instruction stream print out a selected stack frame Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 203
configuration register to match the hex number specified. Without the argument, the confreg command dumps the contents of the virtual configuration register in English and allows you to alter the contents. You are Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 204
you reset or power cycle the gateway. The configuration register resides in NVRAM. The configuration register is identical in operation to other Cisco gateways. Enter the confreg . For example: rommon 6 > context Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 4 - Cisco AS5350XM | Software Configuration Guide - Page 205
ports (labeled GE0 and GE1 on the chassis). The Cisco IOS firmware and software is designed so that configurations for Fast Ethernet will work on the Cisco AS5350XM and AS5400XM universal gateways without requiring any modification by the user. If the Cisco IOS commands, write or copy running-config - Cisco AS5350XM | Software Configuration Guide - Page 206
size of nonvolatile memory (NVRAM). For example: rommon 9 > meminfo Main memory size:128 MB. Packet memory size:64 MB Available main memory starts at 0xa000e000, size 0x7ff2000 Packet memory starts at 0xa8000000 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 207
memory control register:0xbe9022f4 Shared memory control register:0x00000202 • reset or i-Resets and initializes the system, similar to power Support: http://www.cisco.com/techsupport Copyright (c) 2004 by cisco Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 7 - Cisco AS5350XM | Software Configuration Guide - Page 208
included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. © 2006, 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 8 - Cisco AS5350XM | Software Configuration Guide - Page 209
in this chapter applies to the Cisco AS5350XM and Cisco AS5400XM universal gateways. This chapter includes sample outputs of the show config command after you have completed the procedures in Chapter 2, "Verifying Basic Setup," and have configured various advanced features. The following examples - Cisco AS5350XM | Software Configuration Guide - Page 210
t1 3 controller t1 4 controller t1 5 controller t1 6 controller t1 7 controller t1 8 controller t1 9 controller t1 10 controller t1 11 controller t1 12 controller t1 13 controller t1 14 controller t1 15 controller Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 211
! controller T1 1/0:10 framing esf pri-group timeslots 1-24 ! controller T1 1/0:11 framing esf pri-group timeslots 1-24 ! controller T1 1/0:12 framing esf pri-group timeslots 1-24 ! controller T1 1/0:13 framing esf Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 3 - Cisco AS5350XM | Software Configuration Guide - Page 212
1-24 type e&m-fgb cas-custom 0 ! controller T1 1/0:25 framing esf ds0-group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! controller T1 1/0:26 framing esf ds0-group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 4 - Cisco AS5350XM | Software Configuration Guide - Page 213
address 10.1.1.2 255.255.255.0 no ip directed-broadcast encapsulation ppp ip mroute-cache logging event link-status no keepalive dialer idle-timeout 72000 either Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 5 - Cisco AS5350XM | Software Configuration Guide - Page 214
encapsulation ppp ip mroute-cache logging event link-status no keepalive dialer idle-timeout 72000 either dialer-group 1 isdn switch-type primary-5ess isdn incoming-voice data Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 6 - Cisco AS5350XM | Software Configuration Guide - Page 215
ppp ip mroute-cache logging event link-status no keepalive dialer idle-timeout 72000 either dialer-group 1 isdn switch-type primary-5ess isdn incoming-voice data no fair-queue no cdp enable ppp authentication chap ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 7 - Cisco AS5350XM | Software Configuration Guide - Page 216
switch-type primary-5ess isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ppp authentication chap ! interface Serial1/0:15:23 ip address 10.1.14.2 255.255.255.0 no ip directed-broadcast encapsulation ppp Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 8 - Cisco AS5350XM | Software Configuration Guide - Page 217
dialer-group 1 isdn switch-type primary-5ess isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ppp authentication server ! logging facility local5 logging 192.168.1.137 dialer-list 1 protocol ip permit Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 9 - Cisco AS5350XM | Software Configuration Guide - Page 218
12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption service internal ! hostname CT3-Mixed-UUT ! no boot startup-test logging buffered 32000 debugging ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 10 - Cisco AS5350XM | Software Configuration Guide - Page 219
t1 20 controller t1 21 controller t1 22 controller t1 23 controller t1 24 controller t1 25 controller t1 26 controller t1 27 controller t1 28 controller ! controller T1 1/0:1 framing esf pri-group timeslots 1-24 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 220
group timeslots 1-24 ! controller T1 1/0:15 framing esf pri-group timeslots 1-24 ! controller T1 1/0:16 framing esf pri-group timeslots 1-24 ! controller T1 1/0:17 framing esf ds0-group 0 timeslots 1-24 type e&m-fgb Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 12 - Cisco AS5350XM | Software Configuration Guide - Page 221
1-24 type e&m-fgb cas-custom 0 ! controller T1 1/0:28 framing esf ds0-group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! ! ! ! ! interface GigabitEthernet0/0 description VLAN 6 ip address 192.168.6.100 255.255.255.0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 13 - Cisco AS5350XM | Software Configuration Guide - Page 222
idle-timeout 72000 either dialer-group 1 isdn switch-type primary-5ess isdn incoming-voice data no fair-queue no cdp enable ppp authentication chap ! interface Serial1/0:2:23 -timeout 72000 either dialer-group 1 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 14 - Cisco AS5350XM | Software Configuration Guide - Page 223
encapsulation ppp ip mroute-cache logging event link-status no keepalive dialer idle-timeout 72000 either dialer-group 1 isdn switch-type primary-5ess isdn incoming-voice data no fair-queue no cdp enable Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 15 - Cisco AS5350XM | Software Configuration Guide - Page 224
idle-timeout 72000 either dialer-group 1 isdn switch-type primary-5ess isdn incoming-voice modem no fair-queue no cdp enable ppp authentication chap ! interface Serial1/0:12:23 ip address 10.1.11.2 255.255.255.0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 16 - Cisco AS5350XM | Software Configuration Guide - Page 225
-voice modem fair-queue 64 256 0 no cdp enable ppp authentication chap ! interface Serial1/0:16:23 ip address 10.1.15.2 255.255.255.0 no ip directed-broadcast encapsulation ppp ip mroute-cache logging event link-status Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 226
-server community v3c view v1default RO snmp-server contact Test123456 snmp-server chassis-id 'router for AS5400 ct3' ! line con 0 exec-timeout 0 0 logging synchronous transport input none line aux 0 exec-timeout 0 0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 227
-size 110 limit overflow-size 18 resource 4700 speech dnis group default ! resource-pool profile customer 5300 limit base-size 538 limit overflow-size 18 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 19 - Cisco AS5350XM | Software Configuration Guide - Page 228
t1 24 controller t1 25 controller t1 26 controller t1 27 controller t1 28 controller ! controller T1 7/0:1 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:2 framing esf Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 229
T1 7/0:13 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:14 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:15 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 21 - Cisco AS5350XM | Software Configuration Guide - Page 230
dnis cas-custom 1 ! controller T1 7/0:26 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:27 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 22 - Cisco AS5350XM | Software Configuration Guide - Page 231
Comprehensive Configuration Examples CT3 Without Resource Pooling controller T1 7/0:28 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! ! route 172.17.14.0 255.255.255.0 192.168.21.10 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 23 - Cisco AS5350XM | Software Configuration Guide - Page 232
local aaa authorization network default group aaa.router local aaa accounting update newinfo periodic 30 aaa accounting network default start-stop group aaa.router enable password password ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 24 - Cisco AS5350XM | Software Configuration Guide - Page 233
-recipients 0 ! ! controller T3 7/0 clock source line t1 1 controller t1 2 controller t1 3 controller t1 4 controller t1 5 controller t1 6 controller t1 7 controller t1 8 controller t1 9 controller t1 10 controller Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 25 - Cisco AS5350XM | Software Configuration Guide - Page 234
dnis cas-custom 1 ! controller T1 7/0:8 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:9 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 26 - Cisco AS5350XM | Software Configuration Guide - Page 235
dnis cas-custom 1 ! controller T1 7/0:21 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:22 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 27 - Cisco AS5350XM | Software Configuration Guide - Page 236
fgb dtmf dnis cas-custom 1 ! controller T1 7/0:27 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:28 framing esf ds0-group 1 timeslots -broadcast no group-range ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 28 - Cisco AS5350XM | Software Configuration Guide - Page 237
-server key lab ! line con 0 exec-timeout 0 0 logging synchronous transport input none line aux 0 exec-timeout 0 0 logging synchronous transport input all line vty 0 4 password password no logging synchronous line 1/00 6/107 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration - Cisco AS5350XM | Software Configuration Guide - Page 238
-call-failure 0 cns event-service server mta receive maximum-recipients 0 ! ! controller T1 2/0 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-24 ! controller T1 2/1 framing esf linecode b8zs Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 30 - Cisco AS5350XM | Software Configuration Guide - Page 239
1-24 ! controller T1 5/2 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-24 ! controller T1 5/3 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-24 ! controller T1 5/4 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 31 - Cisco AS5350XM | Software Configuration Guide - Page 240
Serial0/1 no ip address no ip directed-broadcast no ip route-cache no ip mroute-cache shutdown clockrate 2000000 ! interface Serial2/0:23 no ip address Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 32 - Cisco AS5350XM | Software Configuration Guide - Page 241
64 256 0 no cdp enable ! interface Serial2/7:23 no ip address no ip directed-broadcast isdn switch-type primary-5ess isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface Serial5/0:23 no ip address Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 33 - Cisco AS5350XM | Software Configuration Guide - Page 242
! interface Serial5/7:23 no ip address no ip directed-broadcast isdn switch-type primary-5ess isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface Async1/00 ip address 172.16.97.1 255.255.255.0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 34 - Cisco AS5350XM | Software Configuration Guide - Page 243
Comprehensive Configuration Examples Two 8 T1/PRI ISDN with Modems no ip directed-broadcast encapsulation ppp no ip route-cache dialer string 7150100003 dialer-group 1 async default routing async mode interactive Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 35 - Cisco AS5350XM | Software Configuration Guide - Page 244
Two 8 T1/PRI ISDN with Modems Comprehensive Configuration Examples no peer default ip address no fair-queue ppp authentication chap mroute-cache dialer in-band dialer idle-timeout AS5400 dialer string 7150100007 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 36 - Cisco AS5350XM | Software Configuration Guide - Page 245
Comprehensive Configuration Examples Two 8 T1/PRI ISDN with Modems dialer-group 1 async mode interactive ppp authentication chap ! interface Async1/ -broadcast encapsulation ppp no ip route-cache no ip mroute-cache Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 37 - Cisco AS5350XM | Software Configuration Guide - Page 246
Two 8 T1/PRI ISDN with Modems Comprehensive Configuration Examples dialer in-band dialer idle-timeout AS5400 dialer string 7150100012 in-band dialer idle-timeout AS5400 dialer string 7150100016 dialer-group 1 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 38 - Cisco AS5350XM | Software Configuration Guide - Page 247
Comprehensive Configuration Examples Two 8 T1/PRI ISDN with Modems async mode interactive no peer default ip address no cdp enable ! interface Group-Async0 ip unnumbered GigabitEthernet0/0 no ip directed-broadcast Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 39 - Cisco AS5350XM | Software Configuration Guide - Page 248
8 T1/PRI ISDN with Modems Comprehensive Configuration Examples password 7 1042081B no logging synchronous login line 1/00 1/107 autoselect ppp script dialer dial logging synchronous modem InOut transport input all Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 249
! ! ntp server 192.168.10.1 ! ! ! ip subnet-zero no ip domain-lookup ip host jurai 172.23.254.253 ! isdn switch-type primary-net5 isdn voice-call-failure 0 cns event-service server mta receive maximum-recipients 0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 41 - Cisco AS5350XM | Software Configuration Guide - Page 250
Two 8 E1/PRI ISDN with Modems Comprehensive Configuration Examples ! xgcp snmp sgcp ! controller E1 6/0 pri-group timeslots 1-31 ! controller E1 6/1 pri- no ip address no ip directed-broadcast no ip route-cache Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 42 - Cisco AS5350XM | Software Configuration Guide - Page 251
no ip directed-broadcast isdn switch-type primary-net5 isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface Serial6/5:15 no ip address no ip directed-broadcast isdn switch-type primary-net5 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 43 - Cisco AS5350XM | Software Configuration Guide - Page 252
no ip directed-broadcast isdn switch-type primary-net5 isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface Serial7/5:15 no ip address no ip directed-broadcast isdn switch-type primary-net5 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 44 - Cisco AS5350XM | Software Configuration Guide - Page 253
no ip address no ip directed-broadcast isdn switch-type primary-net5 isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface Async1/00 ip unnumbered chap ! interface Group-Async0 no ip address Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 45 - Cisco AS5350XM | Software Configuration Guide - Page 254
isdn voice-call-failure 0 chat-script dial ABORT ERROR ABORT BUSY ABORT "NO CARRIER" TIMEOUT 120 "" at OK "\datd,,\T" CONNECT cns event-service server mta receive maximum-recipients 0 ! ! controller T1 2/0 framing esf Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 255
group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! controller T1 3/0 framing esf linecode b8zs cablelength short 133 ds0-group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! controller T1 3/1 framing esf linecode b8zs Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 47 - Cisco AS5350XM | Software Configuration Guide - Page 256
auto ! interface GigabitEthernet0/1 no ip address no ip directed-broadcast no ip route-cache no ip mroute-cache shutdown duplex auto speed auto ! interface Serial0/0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 48 - Cisco AS5350XM | Software Configuration Guide - Page 257
Comprehensive Configuration Examples Two 8 T1/PRI CAS with Modems no ip address no ip 10 no ip http server ! dialer-list 1 protocol ip permit ! ! line con 0 exec-timeout 0 0 logging synchronous transport input none Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 49 - Cisco AS5350XM | Software Configuration Guide - Page 258
-pool call treatment profile no-answer ! resource-pool group resource group1 range port 1/0 1/107 ! resource-pool group resource group2 range port 4/0 4/107 range port 5/0 5/107 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 50 - Cisco AS5350XM | Software Configuration Guide - Page 259
type e&m-fgb cas-custom 0 ! controller T1 2/1 framing esf linecode b8zs cablelength short 133 ds0-group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! controller T1 2/2 framing esf linecode b8zs cablelength short 133 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 51 - Cisco AS5350XM | Software Configuration Guide - Page 260
T1 3/2 framing esf linecode b8zs cablelength short 133 ds0-group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! controller T1 3/3 framing esf linecode b8zs cablelength short 133 ds0-group 0 timeslots 1-24 type e&m-fgb Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 261
short 133 ds0-group 0 timeslots 1-24 type e&m-fgb cas-custom 0 ! controller T1 3/7 framing esf linecode b8zs cablelength short 133 ds0-group 0 timeslots 1-24 type e&m- ip mroute-cache shutdown clockrate 2000000 ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 53 - Cisco AS5350XM | Software Configuration Guide - Page 262
-list 1 protocol ip permit ! ! ! line con 0 exec-timeout 0 0 logging synchronous transport input none line aux 0 logging synchronous line vty 0 4 password 7 13091610 no logging synchronous login line 1/00 1/107 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 54 - Cisco AS5350XM | Software Configuration Guide - Page 263
group resource group2 range port 4/0 4/107 range port 5/0 5/107 ! resource-pool group resource group3 range port 6/0 6/107 range port 7/0 7/107 ! resource-pool profile customer bell_atlantic Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 55 - Cisco AS5350XM | Software Configuration Guide - Page 264
1-24 ! controller T1 2/2 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-24 ! controller T1 2/3 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-24 ! controller T1 2/4 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 56 - Cisco AS5350XM | Software Configuration Guide - Page 265
133 pri-group timeslots 1-24 ! controller T1 5/5 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-24 ! controller T1 5/6 framing esf linecode b8zs cablelength short 133 pri-group timeslots 1-24 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 57 - Cisco AS5350XM | Software Configuration Guide - Page 266
Configuration Examples ! controller T1 voice modem fair-queue 64 256 0 no cdp enable ! interface Serial2/2:23 no ip address no ip directed-broadcast isdn switch-type primary-5ess isdn incoming-voice modem Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 267
isdn switch-type primary-5ess isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface Serial5/2:23 no ip address no ip directed-broadcast isdn switch-type primary-5ess isdn incoming-voice modem Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 59 - Cisco AS5350XM | Software Configuration Guide - Page 268
authentication chap hold-queue 1000 in hold-queue 1000 out ! interface Async1/01 ip address 172.16.98.1 255.255.255.0 no ip directed-broadcast Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 60 - Cisco AS5350XM | Software Configuration Guide - Page 269
Comprehensive Configuration Examples Two 8 T1/PRI ISDN with RADIUS (AAA) and Resource Pooling encapsulation ppp no ip route- dialer-group 1 async default routing async mode interactive no peer default ip address Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 61 - Cisco AS5350XM | Software Configuration Guide - Page 270
Two 8 T1/PRI ISDN with RADIUS (AAA) and Resource Pooling Comprehensive Configuration Examples no fair-queue ppp authentication chap hold-queue 1000 in ! interface Async1/09 ip address 172.16.106.1 255.255.255.0 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 62 - Cisco AS5350XM | Software Configuration Guide - Page 271
Comprehensive Configuration Examples Two 8 T1/PRI ISDN with RADIUS (AAA) and Resource Pooling no ip directed-broadcast cache dialer in-band dialer idle-timeout AS5400 dialer string 7150100013 dialer-group 1 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 63 - Cisco AS5350XM | Software Configuration Guide - Page 272
Two 8 T1/PRI ISDN with RADIUS (AAA) and Resource Pooling Comprehensive Configuration Examples async mode interactive no peer default ip address no interactive no peer default ip address ppp authentication chap ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 64 - Cisco AS5350XM | Software Configuration Guide - Page 273
Comprehensive Configuration Examples Two 8 T1/PRI ISDN with RADIUS (AAA) and Resource Pooling interface Async1/18 ip address 172. never ip nat translation syn-timeout never ip nat translation dns-timeout never Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 65 - Cisco AS5350XM | Software Configuration Guide - Page 274
ppp script dialer dial logging synchronous modem InOut transport input all line 3/00 4/107 autoselect ppp script dialer dial logging synchronous modem InOut transport input all line 6/00 7/107 autoselect ppp Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 66 - Cisco AS5350XM | Software Configuration Guide - Page 275
base-size all limit overflow-size 0 resource group2 speech dnis group group2 ! resource-pool profile customer us_west limit base-size 60 limit overflow-size 100 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 67 - Cisco AS5350XM | Software Configuration Guide - Page 276
172.23.254.253 ! isdn switch-type primary-net5 isdn voice-call-failure 0 cns event-service server mta receive maximum-recipients 0 ! xgcp snmp sgcp ! controller 1-31 ! controller E1 7/2 pri-group timeslots 1-31 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 68 - Cisco AS5350XM | Software Configuration Guide - Page 277
-net5 isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface Async1/00 ip unnumbered GigabitEthernet0/0 no ip directed-broadcast encapsulation ppp async mode interactive ppp authentication chap Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 69 - Cisco AS5350XM | Software Configuration Guide - Page 278
not_allowed number 66666 dialer-list 1 protocol ip permit ! ! line con 0 exec-timeout 0 0 transport input none speed 9600 line aux 0 line vty 0 4 login CT3 with Resource Pooling, AAA, and Modem AS5400# show config Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 70 - Cisco AS5350XM | Software Configuration Guide - Page 279
4700 speech ! resource-pool profile customer 5300 limit base-size 538 limit overflow-size 18 resource 5300 speech dnis group elnino ! resource-pool profile service gold modem min-speed 33200 max-speed 56000 ! ! ! Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 71 - Cisco AS5350XM | Software Configuration Guide - Page 280
e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:7 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:8 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 72 - Cisco AS5350XM | Software Configuration Guide - Page 281
T1 7/0:19 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:20 framing esf ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis cas-custom 1 ! controller T1 7/0:21 framing esf Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide - Cisco AS5350XM | Software Configuration Guide - Page 282
172.22.35.71 255.255.0.0 shutdown duplex auto speed auto ! interface Serial0/0 no ip address shutdown clockrate 2000000 ! interface Serial0/1 no ip address hutdown Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 74 - Cisco AS5350XM | Software Configuration Guide - Page 283
radius-server host 192.168.1.138 auth-port 1645 acct-port 1646 radius-server retransmit 2 radius-server timeout 9 radius-server deadtime 30 radius-server key lab ! ! line con 0 exec-timeout 0 0 logging synchronous Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 75 - Cisco AS5350XM | Software Configuration Guide - Page 284
included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. © 2006, 2009 Cisco Systems, Inc. All rights reserved. Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide 76
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
 |
 |
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco AS5350XM and
Cisco AS5400XM Universal Gateways
Software Configuration Guide
Release 12.4T