Cisco CISCO892-K9 Hardware Installation Guide - Page 105

Appendix A Technical Specifications Wireless Access Point Wireless Access Point Table A-2 lists the specifications for the wireless access point (AP). Table A-2 Wireless Access Point Specifications Description Radio technology Operating frequency Channels PHY Data rate 1. MIMO = Multiple Input/Multiple Output. Design Specification IEEE 802.11n draft 2.0 standard compliant. 2x3 MIMO1 radio. Backward compatible with 802.11b/g and 802.11a (Cisco 890 series routers). Cisco 860 series and 880 series ISRs 2.4-GHz radio band Cisco 890 series ISRs 2.4 and 5-GH radio bands Country-specific 20 and 40 MHz 802.11b up to 11 Mb/s 802.11g up to 54 Mb/s 802.11n up to 300 Mb/s FE and GE Port Pinouts Table A-3 describes the RJ-45 connector pinouts for Fast Ethernet (FE) ports with Power over Ethernet (PoE). Some models support PoE using an optional module, and some models do not support PoE. For ports that do not support PoE, pins 4, 5, 7, and 8 are not connected. • Cisco 860VAE and 860VAE-K9 ISRs do not support PoE. • Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to FE ports 0 and 1. • Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to FE ports 0, 1, 2, and 3. Table A-3 Ethernet FE LAN Port Pinouts Pin Function 1 RX+1 2 RX- 3 TX+2 4 PoE-optional 5 PoE-optional 6 TX- 7 PoE-optional 8 PoE-optional Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-07 A-3