Cisco CISCO892-K9 Hardware Installation Guide - Page 47
Connections, Ethernet Devices, Installing the Router, Warnings - rack mount
UPC - 882658209192
View all Cisco CISCO892-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 2 Installing the Router Installing the Router Connections Obtain a broadband or Ethernet connection from your service provider. Ethernet Devices Identify the Ethernet devices that you will connect to the router: hub, servers, and workstations or PCs. Ensure that each device has a network interface card (NIC) for connecting to Ethernet ports. • If you plan to configure the software using Cisco IOS commands through the console port, provide an ASCII terminal or a PC that is running terminal emulation software to connect to the console port. • If you plan to connect a modem, provide the modem and modem cable. • If you plan to use the Data BRI port, provide an NT1 device and an ISDN S/T cable. • If you plan to use the cable-lock feature, provide a Kensington or equivalent locking cable. Installing the Router This section describes how to install the Cisco 860 series, 880 series, and 890 series ISRs. These routers can either be installed on a table top or other flat horizontal surface or be mounted on a wall. The Cisco 890 series ISRs may be mounted in a rack. This section also describes how to attach WLAN antennas to the Cisco 890 series routers. This section contains the following topics: • Warnings, page 2-3 • Installing Antennas, page 2-4 • Installing on a Table, page 2-7 • Mounting on a Wall, page 2-7 • Installing in a Rack, page 2-10 • Installing the Router Ground Connection, page 2-11 Warnings Warning This equipment needs to be grounded. Use a green and yellow 12 to 14 AWG ground wire to connect the host to earth ground during normal use. Statement 242 Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-07 2-3