Cisco HWIC-4ESW User Guide - Page 5
Intrachassis Stacking, Fallback Bridging, Default 802.1x Configuration, Feature, Default Setting - configuring
UPC - 746320953731
View all Cisco HWIC-4ESW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards Information About EtherSwitch HWICs Intrachassis Stacking For conceptual information about intrachassis stacking, see the 'Intrachassis Stacking" section of the EtherSwitch Network Module. Fallback Bridging For conceptual information about fallback bridging, see the "Fallback Bridging" section of the EtherSwitch Network Module. Default 802.1x Configuration Table 1 shows the default 802.1x configuration. Table 1 Default 802.1x Configuration Feature Authentication, authorization, and accounting (AAA) RADIUS server • IP address • UDP authentication port • Key Per-interface 802.1x enable state Periodic reauthentication Number of seconds between reauthentication attempts Quiet period Retransmission time Maximum retransmission number Multiple host support Default Setting Disabled. • None specified. • 1645. • None specified. Disabled (force-authorized). The port transmits and receives normal traffic without 802.1x-based authentication of the client. Disabled. 3600 seconds. 60 seconds (number of seconds that the switch remains in the quiet state following a failed authentication exchange with the client). 30 seconds (number of seconds that the switch should wait for a response to an EAP request/identity frame from the client before retransmitting the request). 2 times (number of times that the switch will send an EAP-request/identity frame before restarting the authentication process). Disabled. 5