Cisco HWIC-4ESW User Guide - Page 7
Configuring VLANs, Adding a VLAN Instance, Deleting a VLAN Instance from the Database - card
UPC - 746320953731
View all Cisco HWIC-4ESW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards How to Configure EtherSwitch HWICs • Managing the EtherSwitch HWIC, page 78 Configuring VLANs This section describes how to configure VLANs on the switch and contains the following sections: • Adding a VLAN Instance, page 6 • Deleting a VLAN Instance from the Database, page 6 Adding a VLAN Instance A total of 15 VLANs can be supported by an EtherSwitch HWIC. Follow the steps below to configure a Fast Ethernet interface as Layer 2 access. SUMMARY STEPS 1. enable 2. vlan database 3. vlan vlan-id 4. exit DETAILED STEPS Command or Action Step 1 enable Step 2 Example: Router> enable vlan database Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters VLAN configuration mode. Step 3 Example: Router# vlan database vlan vlan-id Step 4 Example: Router(vlan)# vlan 1 exit Example: Router(vlan)# exit Adds an Ethernet VLAN. • Enter the VLAN number. Updates the VLAN database, propagates it throughout the administrative domain, and returns to privileged EXEC mode. Deleting a VLAN Instance from the Database You cannot delete the default VLANs for the different media types: Ethernet VLAN 1 and FDDI or Token Ring VLANs 1002 to 1005. 7