Cisco HWIC-4ESW User Guide - Page 8
Configuring VLAN Trunking Protocol, Configuring a VTP Server
UPC - 746320953731
View all Cisco HWIC-4ESW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
How to Configure EtherSwitch HWICs Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards Follow the steps below to delete a VLAN from the database. SUMMARY STEPS 1. enable 2. vlan database 3. no vlan vlan-id 4. exit DETAILED STEPS Command or Action Step 1 enable Step 2 Example: Router> enable vlan database Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters VLAN configuration mode. Step 3 Example: Router# vlan database no vlan vlan-id Step 4 Example: Router(vlan)# no vlan 1 exit Example: Router(vlan)# exit Deletes an Ethernet VLAN. • Enter the VLAN number. Updates the VLAN database, propagates it throughout the administrative domain, and returns to privileged EXEC mode. Configuring VLAN Trunking Protocol This section describes how to configure the VLAN Trunking Protocol (VTP) on an EtherSwitch HWIC, and contains the following tasks: • Configuring a VTP Server, page 7 • Configuring a VTP Client, page 8 • Disabling VTP (VTP Transparent Mode), page 9 Note VTP pruning is not supported by EtherSwitch HWICs. Configuring a VTP Server When a switch is in VTP server mode, you can change the VLAN configuration and have it propagate throughout the network. Follow the steps below to configure the switch as a VTP server. 8