Cisco M10-CA User Guide - Page 16

User Guide Chapter 3: Advanced Configuration After setting up the Valet with the Setup Wizard (located on the Setup Key), the Valet is ready for use. For more technically knowledgeable users, the Valet does include Advanced Configuration settings. If you'd like to change some of the Valet's advanced settings, you can modify settings using the browser‑based utility. WARNING: Modifying some settings in the browser‑based utility may disable settings you've already applied using the Easy Setup Key. This chapter describes each web page of the utility and the key functions on each page. You can access the utility via a web browser on a computer connected to the Valet. The browser-based utility has the following main tabs: •• Setup •• Wireless •• Security •• Access Restrictions •• Applications & Gaming •• Administration •• Status Additional tabs become available after you click one of the main tabs. How to Access the Browser-Based Utility To access the browser-based utility, launch the web browser on your computer, and enter the IP address of the Valet in the Address field. The default IP address of the Valet is: 192.168.1.1 Then, press Enter. NOTE: You can also access the browser‑based utility on Windows computers by entering the device name in the Address field. Refer to Device name under "Router IP" on page 16. A login screen will appear. (Non-Windows 7 users will see a similar screen.) 1. In the User name field, enter admin. 2. In the Password field, enter the password created by the setup software. (If you did not run the setup software, then use the default password, admin. (You can set a new password on the Administration > Management screen; refer to "Administration > Management" on page 31.) 3. Click OK to continue. Chapter 3: Advanced Configuration Windows 7 Login Screen NOTE: You can also access the browser‑based utility through the Cisco Connect software. For more information, refer to "Advanced Settings" on page 13. Setup > Basic Setup The first screen that appears is the Basic Setup screen. This screen allows you to change the language of the text displayed in the browser-based utility, configure the Internet connection settings, configure the network settings, and select time zone settings. Setup > Basic Setup Language The Language section allows you to change the language of the text displayed in the browser-based utility. Internet Setup The Internet Setup section configures the Valet to your Internet connection. Most of this information can be obtained through your Internet Sevice Provider (ISP). 14