Cisco M10-CA User Guide - Page 36

User Guide Administration > Firmware Upgrade The Firmware Upgrade screen allows you to upgrade the Valet's firmware. Do not upgrade the firmware unless you are experiencing problems with the Valet or the new firmware has a feature you want to use. Chapter 3: Advanced Configuration Status > Router The Router screen displays information about the Valet and its current settings. Administration > Firmware Upgrade NOTE: The Valet may lose the settings you have customized. Before you upgrade its firmware, write down all of your custom settings. After you upgrade its firmware, you may have to re‑enter all of your configuration settings. Firmware Upgrade Before upgrading the firmware, download the firmware upgrade file specifically for your model from the website, www.thevalet.com. Please select a file to upgrade the firmware Click Browse and select the firmware upgrade file. Start to Upgrade After you have selected the appropriate file, click this button, and follow the on-screen instructions. WARNING: Do not interrupt the upgrade process. You should not turn off the power or press the reset button during the upgrade process. Doing so may render the Valet unusable. Status > Router Router Information Firmware Version This is the version number of the Valet's current firmware. Firmware Verification This shows the unique identifier of the firmware. Current Time This shows the time set on the Valet. Internet MAC Address This is the Valet's MAC Address, as seen by your ISP. Host Name If required by your ISP, this was entered on the Basic Setup screen. Domain Name If required by your ISP, this was entered on the Basic Setup screen. Internet Connection This section shows the current network information stored in the Valet. The information varies depending on the Internet connection type selected on the Basic Setup screen. Click Refresh to update the on-screen information. 34