Cisco M10-CA User Guide - Page 3

User Guide Chapter 1: Valet Chapter 1: Valet Thank you for choosing a Cisco Valet wireless hotspot. This Quick Reference Guide covers both the Valet and Valet Plus models. Valet will be used as a general reference to both models and all details in this Quick Reference Guide apply to both models unless Valet Plus is noted. Top LEDs (1-4) light up once the Valet is connected to a device using a network (Ethernet) cable. The LED flashes when there is activity over that port. Valet Plus lights up green when connected to a device at gigabit speed or blue when connected to a device at 10/100 speed. The Wi-Fi Protected Setup Button doesn't need to be used if you use the Easy Setup Key to connect devices to your network. If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup™, then you can use the Wi-Fi Protected Setup button to automatically configure wireless security for your wireless network(s). To use Wi-Fi Protected Setup, refer to "Wi-Fi Protected Setup" on page 21. The Power LED lights up when the Valet is powered on. It is normal for this to flash during startup. The Internet LED lights up when connected to the Internet and flashes to indicate activity. Valet Plus lights up green when connected to a device at gigabit speed or blue when connected to a device at 10/100 speed. The Wireless LED lights up when wireless is on. It flashes when the Valet sends or receives data over the wireless network. 1