Cisco SPA501 User Guide - Page 69

Using the Phone Web User Interface Setting Voice User Parameters 5 Setting Voice User Parameters The voice User parameters control the phone user options, such as caller ID and speed dial numbers. The table identifies and describes the parameters in the User tab. Parameter Description Cfwd Setting Choose yes from the drop-down menu to enable call forwarding. Choose no to disable the feature. Cfwd All Dest Enter the target phone number to where all calls are forwarded. When this field is anything other than blank, the phone rings once and the call is forwarded. CFWD Busy Dest Enter the target phone number to where all calls are forwarded when this phone is busy. CFWD No Ans Dest Enter the target phone number to where all calls are forwarded. CFWD No Ans Delay Enter the number of seconds to delay before forwarding calls because there is no answer at your phone. Speed Dial X Enter the target a phone number, IP address, or URL that will be called or launched when you press the speed dial number. You can configure up to eight speed dials, one for each of the numbered keys 2 through 9. CW Setting Choose yes from the drop-down menu to enable call waiting. Choose no to disable the feature. Call waiting alerts you when you are on a call by ringing the phone and displaying a status message that you have an incoming call. If you turn call waiting off, incoming calls do not ring your phone when you are on another call, and the caller hears a busy signal or message. Block CID Setting Choose yes from the drop-down menu to block your caller ID from displaying on another phone. Choose no to disable the feature. Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 69