Cisco SPA8000-G1 Administration Guide - Page 145
Ring and Call Waiting Tone Spec ATA Voice Field Reference, Field, Description
View all Cisco SPA8000-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
ATA Voice Field Reference Regional page B Ring7 Name Ring8 Name Ring9 Name Name in an INVITE's Alert-Info Header to pick distinctive ring/CWT 7 for the inbound call. The default is Bellcore-r7. Name in an INVITE's Alert-Info Header to pick distinctive ring/CWT 8 for the inbound call. The default is Bellcore-r8. Name in an INVITE's Alert-Info Header to pick distinctive ring/CWT 9 for the inbound call. This field is for the SPA2102 only. The default is Bellcore-r9. Voice tab > Regional page > Ring and Call Waiting Tone Spec section IMPORTANT: Ring and Call Waiting tones don't work the same way on all phones. When setting ring tones, consider the following recommendations: • Begin with the default Ring Waveform, Ring Frequency, and Ring Voltage. • If your ring cadence doesn't sound right, or your phone doesn't ring, change your Ring Waveform, Ring Frequency, and Ring Voltage to the following: - Ring Waveform: Sinusoid - Ring Frequency: 25 - Ring Voltage: 80V Field Ring Waveform Ring Frequency Ring Voltage Description Waveform for the ringing signal. Choices are Sinusoid or Trapezoid. The default is Trapezoid. Frequency of the ringing signal. Valid values are 10-100 (Hz). The default is 20. Ringing voltage. Choices are 60-90 (V). The default is 85. Cisco Small Business ATA Administration Guide 145