Cisco SPA8000-G1 Administration Guide - Page 213
Ring Settings FXO (PSTN) Timer Values (sec) VoIP Answer Delay
View all Cisco SPA8000-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
ATA Voice Field Reference PSTN Line page (SPA3102) B Voice tab > PSTN Line page (SPA3102) > Ring Settings section Default Ring 1-8, Follow Line Cfg Voice tab > PSTN Line page (SPA3102) > FXO (PSTN) Timer Values (sec) section VoIP Answer Delay Delay in seconds before auto-answering inbound VoIP calls for the FXO account. The range is 0-255. PSTN Answer Delay The default is 3. Delay in seconds before auto-answering inbound PSTN calls after the PSTN starts ringing. The range is 0-255. VoIP PIN Digit Timeout The default is 16. Timeout to wait for the 1st or subsequent PIN digits from a VoIP caller. The range is 0-255. PSTN PIN Digit Timeout The default is 10. Timeout to wait for the 1st or subsequent PIN digits from a PSTN caller. The range is 0-255. VoIP DLG Refresh Intvl The default is 10. Interval between (SIP) Dialog refresh messages sent by the SPA to detect if the VoIP call-leg is still up. If value is set to 0, SPA will not send refresh messages and VoIP call-leg status is not checked by the SPA. The refresh message is a SIP ReINVITE and the VoIP peer must response with a 2xx response. If VoIP peer does not reply or response is not greater than 2xx, the SPA will disconnect both PSTN and VoIP call legs automatically. The range is 0-255. The default is 30. Cisco Small Business ATA Administration Guide 213