Cisco SRP521W-K9-G1 Administration Guide - Page 197

Administration Settings Remote Management 8 Web Access Management Settings Field Description Remote Upgrade If enabled, the firmware for the SRP can be upgraded from the Internet. NOTE You can only change this setting when connecting to the web interface from the LAN. Allowed Remote IP Address To access the SRP from any external IP address, select Any IP Address. To specify an external IP address or range of IP addresses, select the second radio button and enter the desired IP address(es). Remote Management Port Enter the remote access port number. The default port number is 8080. Remote Management Use the Remote Management pages to configure settings for the following: • TR069 • SNMP • Local TFTP To access these pages click Administration > Remote Management from the Configuration Utility. TR069 Some service providers can automatically provision your customer premises equipment from a central server. Use the TR-069 page to set up communication with an Auto-Configuration Server (ACS). STEP 1 Click Administration > Remote Management > TR-069. The TR-069 window opens. STEP 2 Click Enabled to allow auto-configuration of the SRP from a central server. The default is Disabled. STEP 3 Specify the TR-069 settings as defined in the TR-069 Settings table. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 197