Cisco SRW248G4P User Guide - Page 8
Back Panel, Side Panel, POWER, CONSOLE, SECURITY SLOT
View all Cisco SRW248G4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Chapter 2 MiniGBIC (1-2) The Switch is equipped with two miniGBIC ports that have shared Gigabit Ethernet ports (G3 and G4) which provide for the installation of one expansion module. These ports provide links to high-speed network segments or individual workstations at speeds of up to 1000Mbps (Gigabit Ethernet). To establish a Gigabit Ethernet connection using a miniGBIC port, you will need to install a MGBT1, MGBSX2, or MGBLH1 Gigabit expansion module and use Category 5e cabling or fiber optic cabling. To establish a Fast Ethernet connection using a miniGBIC port, you will need to install a MFEFX1 (100BASE-FX) or MFELX1 (100BASE-LX) 100SFP Transceiver and use fiber optic cabling. Back Panel The console and power ports are located on the back panel of the Switch. Back Panel POWER The Power port is where you will connect the AC power. CONSOLE The Switch is equipped with a serial port labeled Console (located on the back of the switch) that allows you to connect to a computer's serial port (for configuration purposes) using the provided serial cable. You can use HyperTerminal to manage the Switch using the console port. Side Panel The security slot is located on a side panel of the Switch. Side Panel SECURITY SLOT The security slot can be utilized to attach a lock to the Switch. 48-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet Product Overview