Cisco WAP200E-EU User Guide - Page 27

Chapter 6 Advanced Configuration Administration > Reboot On this screen you can reboot the Access Point. Administration > Reboot Reboot This feature is useful when you need to remotely reboot the Access Point. Device Reboot To reboot the Access Point, click the Yes option. Click Save Settings to apply your change and the Access Point will reboot itself, or click Cancel Changes to cancel your change. Help information is available on the right side of the screen. Administration > Config Management On this screen you can create a backup configuration file or save a configuration file to the Access Point. Administration > Config Management Wireless-G Exterior Access Point with Power Over Ethernet Config Management Use this screen to upload or download configuration files for the Access Point. Save Configuration To save a backup configuration file on a computer, click the Save Configuration to File button and follow the on-screen instructions. Restore Configuration To upload a configuration file to the Access Point, enter the location of the configuration file in the field provided, or click the Browse button to find the file. Then click the Load button. Help information is available on the right side of the screen. Status > Local Network The Local Network screen displays the Access Point's current status information for the local network. Information Hardware Version This is the version of the Access Point's current hardware. Software Version This is the version of the Access Point's current software. Local MAC Address The MAC address of the Access Point's Local Area Network (LAN) interface is displayed here. System Up Time This is the length of time the Access Point has been running. Local Network IP Address This shows the Access Point's IP Address, as it appears on your local network. 22