Cisco WS-C2960-48PST-S Hardware Installation Guide - Page 26
RPS LED, Port LEDs and Modes, Color, RPS Status, Selected Mode, Port Mode, Description
View all Cisco WS-C2960-48PST-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Front Panel Description Chapter 1 Product Overview RPS LED The RPS LED shows the RPS status. Table 1-3 lists the LED colors and their meanings. Note The Catalyst 2960 8-port switches, and the Catalyst 2960-24-S, 2960-24TC-S, 2960-48TC-S, and 2960-48TT-S switches do not have an RPS LED. Table 1-3 RPS LED Color Off Green Blinking green Amber Blinking amber RPS Status RPS is off or not properly connected. RPS is connected and ready to provide back-up power, if required. RPS is connected but is unavailable because it is providing power to another device (redundancy has been allocated to a neighboring device). The RPS is in standby mode or in a fault condition. Press the Standby/Active button on the RPS, and the LED should turn green. If it does not, the RPS fan could have failed. Contact Cisco Systems. The internal power supply in a switch has failed, and the RPS is providing power to the switch (redundancy has been allocated to this device). For more information about the Cisco RPS 2300 or the Cisco RPS 675, see the related hardware installation guide for that power system. Port LEDs and Modes The port LEDs, as a group or individually, display information about the switch and about the individual ports (Table 1-4): Table 1-4 Modes for Port LEDs Selected Mode LED Port Mode Description STAT Port status The port status. This is the default mode. DUPLX SPEED1 PoE2 Port duplex mode Port speed PoE port power The port duplex mode: full duplex or half duplex. The port operating speed: 10, 100, or 1000 Mb/s. The PoE status. 1. When installed in Catalyst 2960 switches, 1000BASE-T SFP modules can operate at 10, 100, or 1000 Mb/s in full-duplex mode or at 10 or 100 Mb/s in half-duplex mode. 2. The PoE LED is only on the Catalyst 2960 PoE switches. 1-16 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09