Cisco WS-C2960-48PST-S Hardware Installation Guide - Page 50
Connecting to SFP Modules, Connecting to Fiber-Optic SFP Modules
View all Cisco WS-C2960-48PST-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Connecting to SFP Modules Chapter 2 Switch Installation (24- and 48-Port Switches) Figure 2-16 Removing a Bale-Clasp Latch SFP Module by Using a Flat-Blade Screwdriver 1X 11X 204622 1 1 Bale clasp Step 5 Step 6 Grasp the SFP module between your thumb and index finger, and carefully remove it from the module slot. Place the removed SFP module in an antistatic bag or other protective environment. Connecting to SFP Modules This section describes how to connect to SFP modules. For instructions on how to connect to fiber-optic SFP modules, see the "Connecting to Fiber-Optic SFP Modules" section. For instructions on how to connect to copper 1000BASE-T SFP modules, see the "Connecting to 1000BASE-T SFP Modules" section. For instructions about how to install or remove an SFP module, see the "Installing and Removing SFP Modules" section on page 2-15. For instructions on how to connect to a dual-purpose port, see the "Connecting to a Dual-Purpose Port" section on page 2-20. Connecting to Fiber-Optic SFP Modules Warning Class 1 laser product. Statement 1008 Caution Do not remove the rubber plugs from the SFP module port or the rubber caps from the fiber-optic cable until you are ready to connect the cable. The plugs and caps protect the SFP module ports and cables from contamination and ambient light. Before connecting to the SFP module, be sure that you understand the port and cabling stipulations in the "Installation Guidelines" section on page 2-4 and in the "SFP Module Slots" section on page 1-13. See Appendix B, "Connector and Cable Specifications" for information about the LC on the SFP module. 2-18 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09