Cisco WS-C2960S-48FPS-L Hardware Installation Guide - Page 63
Installing the Mounting Screws Under a Desk or Shelf, Step 4
View all Cisco WS-C2960S-48FPS-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 3 Switch Installation (8-Port Switches) Figure 3-3 1 Installing the Mounting Screws Under a Desk or Shelf Installing the Switch 2 250146 3 4 3 1 Desk or shelf 3 Screws 2 Screw template 4 Adhesive Step 4 Step 5 Step 6 Step 7 Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the three screw template slots. Insert three screws in the slots on the screw template, and tighten until they touch the top of the screw template. Remove the screw template from underneath the desk or shelf. Place the switch onto the mounting screws, and slide the switch forward until it locks in place, as shown in Figure 3-4. Note We strongly recommend that you allow at least 3 inches (7.6 cm) of clearance around the ventilation openings to prevent airflow restriction and overheating. OL-7075-09 Catalyst 2960 Switch Hardware Installation Guide 3-9