Cisco WS-C3560X-24T-L Command Reference - Page 252
mac address-table static drop
View all Cisco WS-C3560X-24T-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
mac address-table static drop Chapter 2 Catalyst 3560 Switch Cisco IOS Commands mac address-table static drop Use the mac address-table static drop global configuration command to enable unicast MAC address filtering and to configure the switch to drop traffic with a specific source or destination MAC address. Use the no form of this command to return to the default setting. mac address-table static mac-addr vlan vlan-id drop no mac address-table static mac-addr vlan vlan-id Syntax Description mac-addr vlan vlan-id Unicast source or destination MAC address. Packets with this MAC address are dropped. Specify the VLAN for which the packet with the specified MAC address is received. Valid VLAN IDs are 1 to 4094. Defaults Unicast MAC address filtering is disabled. The switch does not drop traffic for specific source or destination MAC addresses. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Follow these guidelines when using this feature: • Multicast MAC addresses, broadcast MAC addresses, and router MAC addresses are not supported. Packets that are forwarded to the CPU are also not supported. • If you add a unicast MAC address as a static address and configure unicast MAC address filtering, the switch either adds the MAC address as a static address or drops packets with that MAC address, depending on which command was entered last. The second command that you entered overrides the first command. For example, if you enter the mac address-table static mac-addr vlan vlan-id interface interface-id global configuration command followed by the mac address-table static mac-addr vlan vlan-id drop command, the switch drops packets with the specified MAC address as a source or destination. If you enter the mac address-table static mac-addr vlan vlan-id drop global configuration command followed by the mac address-table static mac-addr vlan vlan-id interface interface-id command, the switch adds the MAC address as a static address. 2-220 Catalyst 3560 Switch Command Reference 78-16405-05