Cisco WS-C3560X-24T-L Command Reference - Page 30
Interface Configuration Mode, config-vlan Mode, Ctrl-Z, interface, copy running-config startup-config
View all Cisco WS-C3560X-24T-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
CLI Command Modes Chapter 1 Using the Command-Line Interface The supported commands can vary depending on the version of software in use. To display a comprehensive list of commands, enter a question mark (?) at the prompt. Switch(config)# ? To exit global configuration command mode and to return to privileged EXEC mode, enter the end or exit command, or press Ctrl-Z. Interface Configuration Mode Interface configuration commands modify the operation of the interface. Interface configuration commands always follow a global configuration command, which defines the interface type. Use the interface interface-id command to access interface configuration mode. The new prompt means interface configuration mode. Switch(config-if)# The supported commands can vary depending on the version of software in use. To display a comprehensive list of commands, enter a question mark (?) at the prompt. Switch(config-if)# ? To exit interface configuration mode and to return to global configuration mode, enter the exit command. To exit interface configuration mode and to return to privileged EXEC mode, enter the end command, or press Ctrl-Z. config-vlan Mode Use this mode to configure normal-range VLANs (VLAN IDs 1 to 1005) or, when VTP mode is transparent, to configure extended-range VLANs (VLAN IDs 1006 to 4094). When VTP mode is transparent, the VLAN and VTP configuration is saved in the running configuration file, and you can save it to the switch startup configuration file by using the copy running-config startup-config privileged EXEC command. The configurations of VLAN IDs 1 to 1005 are saved in the VLAN database if VTP is in transparent or server mode. The extended-range VLAN configurations are not saved in the VLAN database. Enter the vlan vlan-id global configuration command to access config-vlan mode: Switch(config)# vlan 2000 Switch(config-vlan)# The supported keywords can vary but are similar to the commands available in VLAN configuration mode. To display a comprehensive list of commands, enter a question mark (?) at the prompt. Switch(config-vlan)# ? For extended-range VLANs, all characteristics except the MTU size must remain at the default setting. To return to global configuration mode, enter exit; to return to privileged EXEC mode, enter end. All the commands except shutdown take effect when you exit config-vlan mode. Catalyst 3560 Switch Command Reference 1-4 78-16405-05