Clifford IntelliGuard 950 Owners Guide - Page 14

disarming without a transmitter This feature allows you to disarm the system without the transmitter should it be lost, damaged, or disabled. In order to disarm without a transmitter, you must have the vehicle's ignition key, know where the PlainView 2 Valet switch is located, and have the PIN code. Be sure to check with the installer for the location of the PlainView 2 Valet switch. Please refer to the Disarm/Valet Mode section of this guide for instructions to enter the pin code. remote siren silencing This system offers remote siren silencing. Remote siren silencing is a fea- ture that makes it possible to silence and reset the system when it is triggering without disarming the system. If the system is triggered and the siren has been sounding, press on the transmitter to stop the trigger and return the unit to the armed state. The system will not dis- arm, but rather reset. This prevents you from disabling the system should you wish to silence it without visually checking the vehicle. After resetting the system, press again to disarm the system. transmitter chirp muting To arm or disarm your system without siren chirps, simply press on the transmitter, and the confirmation chirp(s) will be eliminated for that one operation only. The indicator lights will flash to confirm the arm/disarm command. If you want the arm/disarm chirps turned off permanently, please refer to the User-Selectable Features section of this guide. © 2004 directed electronics, inc. 11