Clifford IntelliGuard 950 Owners Guide - Page 16
auxiliary channel bypass, disarm/valet mode
![]() |
View all Clifford IntelliGuard 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
auxiliary channel bypass Alarm sensor input zones one, two, three, and eight will be bypassed while a pulsed or timed auxiliary Output is active. disarm/valet mode Entering your pin code using the PlainView 2 Valet switch allows you to disarm the system or enter valet mode without using the transmitter. In valet mode, the security system will not arm, even with the transmitter, but all convenience functions (door locks, boot release, etc.) will continue to work normally. To disarm or enter Valet Mode: 1. Turn the ignition on. 2. Enter PIN code (the factory setting is written on the back of this manual). Your pin code has 4 digits. To enter a digit, you press and release the button of the plainview 2 switch the number of times of the digit to be entered, fol- lowed by pressing the unmarked button. To enter a zero, you simple press and release the unmarked button. EXAMPLE: To enter a code of 1203, you would press and release the plainview switch as follows: - , - - , , - - - © 2004 directed electronics, inc. 13
![](/manual_guide/products/clifford-intelliguard-950-owners-guide-0359d32/16.png)