Clifford Remote Keyless Entry Owners Guide - Page 12
See Programming the Headlight ON Duration
View all Clifford Remote Keyless Entry manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Feature Factory setting # of momentary presses Secondary action Program completion confirmation Result Add a New Remote to Channel 2 (optional - remote accessory) 9 Press remote control button 2 within 10 seconds. 2 LED Flashes Button 2/channel 2 code of the new remote control has been memorized Add a New Remote to Channel 3 (optional - remote accessory) 10 Press remote control button 3 within 10 seconds. Button 3/channel 3 code of the new remote control has been memorized Headlight 15 Duration Seconds 11 See Programming the Headlight "ON" Duration on page 9. Example To change the Automatic ("passive") SelfLocking Door feature from its factory setting of "OFF" to "ON," you would do the following: Turn the ignition key to the "ON" position. Enter your valet code. The switch's LED will light to indicate that the system is in programming/valet mode. Then immediately tap and release the momentary side of the PlainView switch 5 times. Wait 3 seconds. The switch's LED will flash once to confirm the successful programming of this feature. That's all there is to it! Adding New Remote Controls Your Remote Keyless Entry System will respond to as many as four Clifford 3-button/3-channel remote controls. To obtain additional remotes, contact any Authorized Clifford dealer. You can also easily program these remotes into the system yourself. To add a new remote control to your system, use the procedures noted in the Programming User-Selectable Features section on pages 10-11. How to Erase the Codes of Lost or Stolen Remote Controls If one of your remote controls is ever lost or stolen, you can erase its digital codes from the system memory to make sure that the missing remote control can never be used to unlock your system. Just use the Add a New Remote Control to Channel 1-2-3 procedures noted in the Programming User-Selectable Features section on pages 10-11 for a total of four times (e.g., if you have one remote control remaining, program it four times; if you have two remote controls, program each twice). © Copyright Clifford Electronics, Inc., 1995 31-131-G/RKESOM/495