Cobra CPI 1090 CPI 1090 - English - Page 10
Remote On/Off Switch, Operating Indicators
View all Cobra CPI 1090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Operation Remote On/Off Switch IRntreo moteOpeOratnion/Off Switch Customer Assistance (nWoatrraninty cluded) • An optional Remote On/Off Switch (see page 24 to order accessories) can be connected to the Remote Jack allowing you to turn the Cobra power inverter on or off from a coInnstvalelatnioinent location when the Main IcoNnostes inverter is installed in an out of reach location. Secondary Icons Remote Switch Operation Operating Indicators OIntrpo eratiOnpegratioInndicaACsutssoitsotrmansecre Warranty • Indicators at the Output End of the unit show the unit's power status and alarms for conditions that could cause it to shut down. Installation Notes Secondary Icons Notice Remote Jack Caution Intro Warning Operation Customer Assistance Warranty Secondary Icons Installation Notes Notice Caution Warning Output Watts Notice Over Current Short Circuit CautPionower onWa-rninTghe Voltage Input and Power Output indicators automatically toggle between input and output values at three-second intervals. The three LEDs indicate the mode the meter is in and the three digits indicate the voltage or power value. Current Overload Protection - If the inverter is overloaded, it will shut down to protect itself. The meter will flash as shown to indicate Overload Protect. To restore normal operation, disconnect the excessive load and turn the unit Off and On again using the Power Button. Short Circuit Protection - If the AC output of the inverter is shortcircuited for one second or more, it will shut down to protect itself. The meter will flash as shown to indicate Short Circuit Protect and an alarm will sound. To restore normal operation, disconnect the short circuit and turn the unit Off and On again using the Power Button. 14 Nothing Comes Close to a Cobra™ 15