Cobra CXT235 Owners Manual - Page 3

Introduction Operation Customer Assistance Warranty Caring for Your microTALK® Radio • Your microTALK® radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures. Installing Batteries • Remove Belt Clip To install or replace batteries: 1. Remove belt clip by releasing belt clip latch and sliding clip up. 2. Pull up on the battery door latch to remove the Pull Up Lock Latch battery compartment cover. Insert Batteries 3. Insert the supplied four AAA rechargeable batteries or non-rechargeable alkaline batteries. Position batteries according to polarity markings. 4. Replace battery compartment cover and belt clip. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc.) batteries. Radio Charger Jack To charge batteries in radio: 1. Check to see that the batteries have been inserted properly. 2. Insert the wall charger/adapter into the charge jack located at the top of the radio. 3. Plug the wall charger/adapter into electrical outlet. Use only the supplied rechargeable batteries and charger for recharging your Cobra microTALK radio. Cobra recommends your radio is turned off while being charged. Non-rechargeable alkaline batteries can also be used in your radio. Nothing Comes Close to a Cobra® 1