Cobra CXT235 Owners Manual - Page 9

Customer Assistance

Warranty

Introduction

Operation

Mode Functions

Operation

12

13

Nothing

Comes Close to a Cobra

®

The

Scan

icon will continue to be displayed when privacy code scan is

on

. Your radio will continue to scan privacy codes and stop as an

incoming transmission is detected. Your radio will remain on that

channel/privacy code for 10 seconds.

During scanning (while receiving an incoming transmission),

you can choose from the following:

a.

Press and hold the

Talk

button to communicate on that

channel/privacy code. Your radio will remain on that

channel/privacy code and return to

Standby

mode.

b.

Press the

Channel Up

or

Channel Down

button to

resume scanning privacy codes. If you do not press any button

within 10 seconds, your radio will automatically resume scanning

privacy codes.

c.

Press the

Lock

button to return to

Standby

.

Five Call Tone Settings

•

You can choose between five different

Call Tone Settings

to transmit a

call alert.

To change a call tone setting:

1.

Press the

Mode/Power

button until the

letter “C” and the current call tone number

(01 through 05) is displayed. The current

call tone will sound for one second.

2.

Press the

Channel Up

or

Channel Down

button

to hear the other call tone settings.

3.

Choose one of the following:

a.

Press the

Mode/Power

button to

enter the new setting and proceed

to other functions.

b.

Press the

Lock

button to enter the new setting

and return to

Standby

mode.

Roger Beep Confirmation Tone

•

Your listener will hear an audible tone when you release the

Talk

button. This alerts the other party that you are finished

talking and it is OK for them to speak.

To turn roger beep on or off:

1.

Press the

Mode/Power

button until the

Roger Beep

icon flashes. The current

on

or

off

setting is displayed.

2.

Press the

Channel Up

or

Channel Down

button

to select roger beep

on

or

off

.

3.

Choose one of the following:

a.

Press the

Mode/Power

button to enter the

new setting and return to

Standby

mode.

b.

Press the

Lock

button to enter the new setting

and return to

Standby

mode.

Channel Button

Channel Button

Mode/Power

Mode/Power

Call Tone Setting

Roger Beep Off

Privacy Code Scan

•

Your microTALK radio can automatically scan the

Privacy Codes

(either

CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only

one set of privacy codes (CTCSS or DCS) can be scanned at a time.

To scan privacy codes:

1.

While in

Standby

mode, press the

Channel Up

or

Channel Down

button to choose the channel on

which you wish to scan privacy codes.

2.

Press the

Mode/Power

button until either the

CTCSS or the DCS icon appears on the display

and the

Scan

icon and the privacy code numbers

flash on the display.

3.

Press the

Channel Up

or

Channel Down

button

to begin scanning privacy codes within the

channel you selected.

Mode/Power

Select Channel

Scan Privacy Codes

Cobra CXT235 Owners Manual - Page 9

Five Call Tone Settings, Roger Beep Confirmation Tone, Privacy Code Scan

Page 9 highlights