Cobra CXT235 Owners Manual - Page 8

Operation Mode Functions Voice Activated Transmit (VOX) • In VOX mode, your microTALK® radio can be used "hands-free," automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. Mode/Power To turn VOX mode on or off: 1. Press the Mode/Power button until the VOX icon flashes on the display. The current On or Off setting is displayed. VOX Icon 2. Press the Channel Up or Channel Down button to turn VOX On or Off. 3. Choose one of the following: Channel Button a. Press the Mode/Power button to enter the selected On or Off setting and proceed to other functions. b. Press the Lock button to enter the selected On or Off setting and return to Standby mode. Mode/Power To set VOX sensitivity: 1. Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed. VOX Sensitivity Level The current VOX sensitivity level is displayed with letters "LE" and a Number 1 through 5, with Number 5 being the most sensitive level and Number 1 being the least sensitive level. Channel Button 2. Press the Channel Up or Channel Down button to change the setting. 3. Choose one of the following: a. Press the Mode/Power button to enter the selected setting and proceed to other functions. b. Press the Lock button to enter the selected setting and return to Standby mode. Introduction Operation Customer Assistance Warranty Channel Scan • Your microTALK® radio can automatically scan channels. Mode/Power To scan channels: 1. Press the Mode/Power button until the Scan icon and the channel numbers appear on the display. Scan Channels 2. Press the Channel Up or Channel Down button to begin scanning channels. The radio ignores specific privacy codes while scanning channels. Channel Button The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds. During scanning (while receiving an incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode. b. Press the Channel Up or Channel Down button to resume scanning channels. c. Press the Lock button to return to Standby. 10 Nothing Comes Close to a Cobra® 11