Cobra CXT345 Owners Manual - Page 5

Lock Function, Listening for a Response, To Adjust Volume, Call Button, To Illuminate Display, Auto - radio

Page 5 highlights

Operation Using Your Radio Listening for a Response • Listening Release the Talk button to receive incoming transmissions. Your microTALK® radio is always in Standby mode while the Talk or Call buttons are not pressed. To Adjust Volume • Volume Button Press the Volume Up or Volume Down button. CALL MODE Volume Level VOLUME CHANNEL A double beep sound is used to indicate the minimum and maximum volume levels (1 through 8). CHANNEL VOLUME Call Button • Call Button Press and release the Call button. The other person will hear a two second call tone. This tone is used only to establish voice CALL MODE communications. CHANNEL See page 13 on how to select between five call tone settings. VOLUME To Illuminate Display CALL MODE • Light/Max Range Press and release the Light/Max Range button to illuminate the display. Auto Squelch/Maximum Range • Your microTALK® radio will automatically shut off weak transmissions and unwanted noise due to terrain, conditions or if you've reached your Maximum Range limit. You can temporarily turn off auto squelch or turn on maximum range extender, allowing all signals to be received and extending the maximum range of your radio. 4 VOLUME CHANNEL Introduction Light/Max Range Operation Customer Assistance Warranty VOLUME CALL MODE To temporarily turn off auto squelch: Press the Light/Max Range button for less than five seconds. To turn maximum range extender on: - Press and hold the Light/Max Range button for at least five seconds until you hear two beeps which indicates the maximum range extender is on. To turn maximum range extender off: - Press and release the Light/Max Range button or change channels. CHANNEL Lock Function • Lock Button The Lock function locks the Channel Up, Channel Down and Mode/Power buttons to prevent CALL MODE accidental operation. To turn the lock on or off: Lock Icon - Press and hold the Lock button for two seconds. A double beep sound is used to confirm your lock on or off request. When in Lock mode, the Lock icon will be displayed. microTALK® Range • Your range will vary depending on terrain and conditions. Maximum Range In flat, open country your radio will operate at maximum range. VOLUME Buildings and foliage in the path of the CHANNEL CALL MODE signal can reduce the range of the radio. Reduced Range Dense foliage and hilly terrain will further reduce the range of the radio. CALL MODE Reduced Range CHANNEL VOLUME CALL MODE VOLUME CHANNEL On FRS Channels 8 through 14, your radio automatically switches to low power, which will limit the range the radio can communicate. Remember, you can achieve maximum range by using maximum range extender. See page 4 for details. Nothing Comes Close to a Cobra® 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

To temporarily turn off auto squelch:
Press the
Light/Max Range
button for
less than five seconds.
To turn maximum range extender on:
Press and hold the
Light/Max Range
button
for at least five seconds until you hear
two beeps which indicates the maximum
range extender is
on
.
To turn maximum range extender off:
Press and release the
Light/Max Range
button or change channels.
Lock Function
The
Lock
function locks the
Channel Up
,
Channel
Down
and
Mode/Power
buttons to prevent
accidental operation.
To turn the lock on or off:
Press and hold the
Lock
button for
two seconds.
A double beep sound is used to confirm your lock
on
or
off
request. When in
Lock
mode,
the
Lock
icon will be displayed.
Customer Assistance
Warranty
Introduction
Operation
Using Your Radio
Operation
Listening for a Response
Release the
Talk
button to receive incoming
transmissions. Your microTALK
®
radio is always in
Standby
mode while the
Talk
or
Call
buttons are
not pressed.
To Adjust Volume
Press the
Volume Up
or
Volume
Down
button.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Call Button
Press and release the
Call
button.
The other person will hear a two second call
tone. This tone is used only to establish voice
communications.
See page 13 on how to select between five
call tone settings.
4
5
VOLUME
CALL
CHANNEL
Volume Button
UME
CALL
MODE
Call Button
Listening
Volume Level
Lock Icon
Light/Max Range
MODE
CHA
Lock Button
To Illuminate Display
Press and release the
Light/Max Range
button
to illuminate the display.
Auto Squelch/Maximum Range
Your microTALK
®
radio will automatically shut
off
weak transmissions
and unwanted noise due to terrain, conditions or if you’ve reached your
Maximum Range
limit.
You can temporarily turn
off
auto squelch or turn
on
maximum range
extender, allowing all signals to be received and extending the maximum
range of your radio.
Light/Max Range
microTALK
®
Range
Your range will vary depending on terrain and conditions.
In flat, open country your radio will
operate at maximum range.
Buildings and foliage in the path of the
signal can reduce the range of the radio.
Dense foliage and hilly terrain will further
reduce the range of the radio.
On FRS Channels 8 through 14, your radio
automatically switches to low power, which
will limit the range the radio can communicate.
Remember, you can achieve maximum
range by using maximum range extender.
See page 4 for details.
Maximum Range
Reduced Range
Reduced Range
Nothing
Comes Close to a Cobra
®