Cobra CXT345 Owners Manual - Page 8

VOLUME Operation Mode Functions Channel Scan • Your microTALK® radio can automatically scan channels. CHANNEL VOLUME Mode/Power To scan channels: CALL MODE 1. Press the Mode/Power button until the Scan icon and the channel numbers appear on the display. Scan Channels 2. Press the Channel Up or Channel Down button to begin scanning channels. The radio ignores specific privacy codes while scanning channels. Channel Button The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is CHANNEL detected. Your radio will remain on that channel for 10 seconds. CALL DMuODEring scanning (while receiving an incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode. b. Press the Channel Up or Channel Down button to resume scanning channels. c. Press the Lock button to return to Standby. During scanning (while receiving an incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that channel/ privacy code. Your radio will remain on that channel/privacy code and return to Standby mode. b. Press the Channel Up or Channel Down button to resume scanning privacy codes. If you do not press any button within 10 seconds, your radio will automatically resume scanning privacy codes. c. Press the Lock button to return to Standby. Introduction Operation Customer Assistance Warranty Privacy Code Scan • Your microTALK radio can automatically scan the Privacy Codes (either CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time. Select Channel To scan privacy codes: 1. While in Standby mode, press the Channel Up or Channel Down button to choose the channel on which you wish to scan privacy codes. CHANNEL VOLUME Mode/Power CALL MODE 2. Press the Mode/Power button until either the CTCSS or the DCS icon appears on the display and the Scan icon and the privacy code numbers flash on the display. 3. Press the Channel Up or Channel Down button Scan Privacy Codes to begin scanning privacy codes within the channel you selected. During scanning (while receiving an incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that channel/ privacy code. Your radio will remain on that channel/privacy code and return to Standby mode. b. Press the Channel Up or Channel Down button to resume scanning privacy codes. If you do not press any button within 10 seconds, your radio will automatically resume scanning privacy codes. c. Press the Lock button to return to Standby. 10 Nothing Comes Close to a Cobra® 11