Cobra CXT345 Owners Manual - Page 7

VOLUME VOLUME Operation Mode Functions CHANNEL VOLUME Set DCS Privacy Codes • Mode/Power To select a DCS privacy code: CALL MODE 1. After selecting a channel, press the Mode/Power button until the DCS icon appears and the small numbers flash on the display (01 through 83). DCS Privacy Code If CTCSS is turned on at the channel selected, the display will flash the DCS icon and "OFF." To switch from CTCSS to DCS, press the Channel Button Channel Up or Channel Down button while the display is flashing "OFF." The display will then show the small numbers flashing and you will then be able to proceed to step 2. CHANNEL 2. CALL MPODrEess using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance. 3. When DCS privacy code is displayed, choose one of the following: a. Press the Mode/Power button to enter the new setting and proceed to other functions. b. Press the Lock button to enter the new setting and return to Standby mode. c. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode. Voice Activated Transmit (VOX) • In VOX mode, your microTALK® radio can be used "hands-free," automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. CHANNEL VOLUME Mode/Power To turn VOX mode on or off: CALL MODE 1. Press the Mode/Power button until the VOX icon flashes on the display. The current On or Off setting is displayed. VOX Icon 2. Press the Channel Up or Channel Down button to turn VOX On or Off. 3. Choose one of the following: Channel Button a. Press the Mode/Power button to enter the selected On or Off setting and proceed to other functions. CHANNEL CALL MODE 8 b. Press the Lock button to enter the selected On or Off setting and return to Standby mode. VOLUME Introduction Operation Customer Assistance Warranty CHANNEL VOLUME Mode/Power CALL MODE To set VOX sensitivity: 1. Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed. VOX Sensitivity Level The current VOX sensitivity level is displayed with letters "LE" and a Number 1 through 5, with Number 5 being the most sensitive level and Number 1 being the least sensitive level. Channel Button CHANNEL CALL MODE 2. Press the Channel Up or Channel Down button to change the setting. 3. Choose one of the following: a. Press the Mode/Power button to enter the selected setting and proceed to other functions. b. Press the Lock button to enter the selected setting and return to Standby mode. Nothing Comes Close to a Cobra® 9