Cobra ESD 7570 ESD 7570 Manual - Page 5
Installation, Getting Started - power cord
View all Cobra ESD 7570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Your Detector Installation Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear, level view of the road and is parallel to the road's surface. The angle CANNOT be adjusted after mounting 2. Remove the paper backing from one side of the hookand-loop fastener. 3. Attach the pad to the dashboard at your chosen location and remove the other paper backing. 4. Attach the detector to the hook-and-loop fastener. You can remove and reattach the unit as often as you like. 5. Plug the power cord into the detector. 6. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. 4 English Your Detector Getting Started Getting Started • Power Indicator Screen X/K Ka L V/S l zzz zzzzz To Turn On The Unit And Adjust The Audio Volume Rotate the On-Off/ Volume control clockwise (away from you). Audio Three beeps Visual Display The LED in the lower left corner of the screen will light to indicate that the power is On. NOTE In some vehicles, power is supplied to the cigarette lighter even while the ignition is Off. If this is the case with your vehicle, you should turn Off or unplug your detector when parking for lengthy periods. Nothing Comes Close to a Cobra® 5