Cobra ESD 7570 ESD 7570 Manual - Page 6

Your Detector Settings Settings • When changing the Settings on your detector, please keep in mind: n Each time the unit is turned On the factory settings of Highway and Auto Mute-On will be set. They can be changed while the unit is in use as described in the following sections. Highway/City Mode Setting your detector to City mode delays all X band audio alerts at lower signal strength levels. (A single beep will sound when the signal is first detected.) This will reduce false alerts while you are driving in, or near, urban areas where there are many sources for conflicting X band signals such as microwave towers and automatic door openers. To change settings, follow the procedure listed below, which indicates what you will see and hear as you complete each step. The factory setting is Highway mode. Highway Mode X/K Ka L V/S City Button Press and release l zzz zzzzz City Mode X/K Ka L V/S l zzz zzzzz C To Change From Highway Mode To City Mode Press and release the City button. Audio One beep Visual Display C LED Lights To Change From City Mode To Highway Mode Press and release the City button again. Audio Two beeps Visual Display Audio Only 6 English Your Detector Settings Muting an Alert Your detector allows you to quickly turn Off an audio Alert by momentarily pressing the Mute button. If you press the Mute button a second time during the Alert, the audio Alert will be turned back On. Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after four seconds for as long as the signal is detected. The factory setting for Auto Mute is On. Mute Button Press and release To Turn Auto Mute Off Press and release the Mute button while no alert is occurring. Audio One beep To Turn Auto Mute On Press and release the Mute button again while no alert is occurring. Audio Two beeps Visual Display Audio Only Visual Display Audio Only Nothing Comes Close to a Cobra® 7