Cobra ESD 7570 ESD 7570 Manual - Page 7

Your Detector Settings Dim Button City Button Mute Button Data Display Brightness You can choose from three settings for Brightness of the display. Repeatedly push the Dim button to cycle through the settings. In Dark mode the power LED will blink slowly to indicate that power is On. The factory setting is Bright. Bright Dark Press and release Dim Button Dim VG-2 Alert Settings Police use radar detector detectors (RDDs) to spot users of radar detectors. Your detector is able to identify signals from VG-2 RDDs and can provide alerts when any of these or similar devices are in use near your vehicle. Your detector is invisible to VG-2 RDDs. You can choose whether you want to be alerted to VG-2 RDD signals. The factory setting for VG-2 alert is Off. To Turn VG-2 Alerts On and Off While no signal is being detected, press and hold the Dim button for four seconds. Audio On = One Beep Off = Two beeps Visual Display V/S Flashes Once V/S Flashes Twice 8 English Your Detector Settings Radar Alert Settings The detector allows you to choose whether it will show alerts on the X, K and Ka Bands. The factory settings are: X, K, and Ka Band On. To Turn X Band On and Off While no signal is being detected, press and hold both the Dim and Mute buttons for four seconds. Audio X On = Two beeps X Off = One beep Visual Display X/K LED Flashes Twice X/K LED Flashes Once To Turn K Band On and Off While no signal is being detected, press and hold both the Mute and City buttons for four seconds. Audio K On = Two beeps K Off = One beep Visual Display X/K Flashes Twice X/K Flashes Once To Turn Ka Band On and Off While no signal is being detected, press and hold the Dim and City buttons for four seconds. Audio Ka On = Two beeps Ka Off = One beep Visual Display Ka Flashes Twice Ka Flashes Once Nothing Comes Close to a Cobra® 9