Coby TF-DVD7060 Instruction Manual - Page 17

BASIC OPERATIONS Basic Disc Playback 1. Prepare the power supply. Set the Power Switch to the ON position to turn the player on. 2. Load a disc. Press the Open button to open the disc compartment lid. Insert a disc with the label-side up. Close the lid by hand (the lid will click into place). • If a single-sided disc is inserted upside-down, the player will display "NO DISC" or "BAD DISC". 3. Start playback. Make sure the AV Switch is set to AV OUT to use the player's built-in LCD screen. Press PLAY to start playback (some discs may start playing automatically). Play/Pause/Stop • Press to play the disc for the first time. • Press during playback to pause. Press again to resume playback. • Press during playback to stop the disc ("Pre-Stop"). Press to resume playback at the time-point at which the disc was stopped. • Press when the disc is "Pre-Stopped" to stop playback completely. (When is pressed, the disc will start playing from the beginning.) Previous/Next (Skip) • Press to skip back one track (DVD, CD, MP3, etc). • Press to skip forward one track (DVD, CD, MP3, etc). Reverse/Forward (Scan) Normal x2 x4 x8 x16 x32 • Press to reverse through the disc. Each successive press of will change the rate of reverse playback. • Press to fast-forward through the disc. Each successive press of will change the rate of forward playback. Slow Normal x1/2 x1/4 x1/8 x1/16 x1/32 • Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate of slow-motion playback. Press to resume normal playback. • Press STEP frame-by-frame playback. Each successive press of STEP will advance the video one frame. Press to resume normal playback. Note: Audio will be muted during fast-forward, fast-reverse, and slow-motion playback. 17