Coby TFDVD1995 User Manual - Page 14

Cable Connections HDMI Input HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection.This cable has a male HDMI Type-A connector on each end, carrying both digital video and audio. These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080-progressive). After all necessary connections have been properly made, turn on both units, select the HDMI mode with the SOURCE button. HDMI Cable External AV Source Component Input (Y Cb/Pb Cr/Pr) The component port is capable of accepting high-definition signals from standard video sources. (e.g., cable/satellite boxes, DVD players, VCRs, etc.) A component cable is required to make this connection.The component video cable has three RCA plugs (red/blue/green) on each end and carries the video signal. 111 Connect the Y, Cb/Pb, Cr/Pr port by the component cable. Component cabel is not included with this product. 222 Use the red and white plug of supplied AV cable to connect the R,L port for audio transmission. 333 After all necessary connections have been properly made, turn on both units, select the Component mode in the source menu with the SOURCE button. Note: The component video jacks on your A/V device are sometimes labeled YPbPr, or YCbCr. For an explanation of component video, see your A/V device's user guide. External AV Source 9