Compaq 621 Compaq 320, 321, 420, 421, 620, 621 Notebook PCs and HP 420, 620 No - Page 91
USB connector assembly, Remove the USB connector assembly
View all Compaq 621 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
2. Disconnect the Bluetooth cable (1) from the system board and remove the antenna (2) from the base enclosure. The antenna is held to the base enclosure with adhesive. Reverse this procedure to install the Bluetooth module. USB connector assembly The spare part number for the USB connector assembly used on all models is 605796-0001. Before removing the USB connector assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49). 5. Remove the palm rest (see Palm rest on page 64). 6. Remove the keyboard (see Keyboard on page 69). 7. Remove the top cover (see Top cover on page 73). Remove the USB connector assembly on 39.6-cm (15.6-in) computers: 1. Position the computer right-side up with the right side toward you. 2. Release the ZIF connector (1) and remove the cable (2) from the system board. Component replacement procedures 81