Compaq CRT Monitor s7500 Service Guide - Page 10

HP S7500/MV7500/CV7500

2-4 Power Saving Function

Note:

The monitor will be driven into “Power Saving” mode by the control signal from the display

controller, as indicated by the amber-color power LED.

Table 2-3. Power Saving Function

State

Power

Consumption

LE

D

Light

ON

Normal

*

Green

Active

OFF

<5 watts

Amber

The power saving states will be kept until a control signal has been detected or the keyboard or mouse is

activated. The recovery time from Active OFF state back to ON state is around 10 seconds.

* For power consumption : 75W Max. (@ 230V AC, preset size and maximum light output condition)

2-5 TCO Version (Optional)

The monitor meets the TCO 95/99, NUTEK energy saving, electric and magnetic field requirements.

Also it is compliant with TCO 95/TCO 99 labelling scheme.

The emission from magnetic and electric field must comply with the limits specified by the Swedish Board

for Measurement and Testing, commonly known as MPR 1990 recommendations. These limits are sum-

marized in the Table 2-4.

Table 2-4. TCO 95 Emission Requirements

VLF/TCO

ELF/TCO

Magnetic Field

25 nT

200 nT

Electric Field

1 V/m

10 V/m

Frequency Range

2~400 kHz

5~2000 Hz

Value

RMS

RMS

Distance

30 cm

30 cm

Electrostatic

Potential

+/- 500 V

+/- 500 V

The monitor is designed with selected CRT and carefully routed wires around CRT, make sure exactly the

Compaq CRT Monitor s7500 Service Guide - Page 10

Power Saving Function, 5 TCO Version Optional

Page 10 highlights