Compaq CRT Monitor s7500 Service Guide - Page 17

Alignment Procedures

Get Compaq CRT Monitor s7500 PDF manuals and user guides View all Compaq CRT Monitor s7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

HP S7500/MV7500/CV7500 4-2 Alignment Procedures 4-2-1 High Voltage Adjustment CONDITION Press 1 and 2 buttons simultaneously when switching the power "On". Display image: No video (68.68kHz Mode) PROCEDURE Connect DC meter to TP002 and adjust HV (i) R802 to obtain a DC voltage of -173.5 ± 0.2 V DC (Sampo FBT) or -172.5 ± 0.2V DC (LCE FBT) for CPT CRT M41AGE93X46 (TCO) or M41AGE83X46 (MPRII) . 4-2-2 Screen and White Balance Adjustment CONDITION Press 1 and 2 buttons simultaneously when switching the power "On". Display image : No video (68.68kHZ Mode) PROCEDURE 1 Raster color setting 1-a. Set Brightness max. to 77, G1 to 60 (OSD cursor) and 530 ± 5 at G2, cursor. 1-b Adjust R and B cutoff to min. 1-c Adjust Gcutoff toabout 0.45FL 1-d Adjust B cutoff to get y=298 ± 5, R cutoff to get x=283 ± 5 and Y=0.65 ± 0.05 FL. 1-e Adjust Brightness cutoff to raster 0.01-0.02 FL. CONDITION Display image : 50 mm x 50 mm white block pattern PROCEDURE 1 55000K color temperature setting 1-a. Set Brightness to cutoff and Contrast to maximum. 1-b Move cursor on OSD to choose color temperature icon. 1-c. With green block pattern, adjust G gain to get Y about 32FL. 1-d Adjust R.B. gain to get x=333 ± 5, y=348 ± 5; and Y=40 ± 0.5FL 2 65000K color temperature setting 2-a. Set Brightness to cutoff and Contrast to maximum. 2-b Move cursor on OSD to choose color temperature icon. 2-c. With green block pattern, adjust G gain to get Y about 32FL. 2-d Adjust R.B. gain to get x=313 ± 5, y=329 ± 5; and Y=43 ± 0.5FL 3 93000K color temperature setting 3-a. Set Brightness to cutoff and Contrast to maximum. 3-b Move cursor on OSD to choose color temperature icon. 3-c. With green block pattern, adjust G gain to get Y about 32FL. Page 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
Page 15
HP S7500/MV7500/CV7500
4-2
Alignment Procedures
4-2-1 High Voltage Adjustment
CONDITION
Press
1
and
2
buttons simultaneously when switching the power “On”.
Display image : No video (68.68kHz Mode)
PROCEDURE
Connect DC meter to TP002 and adjust HV (i)
R802 to obtain a DC voltage of -173.5 ± 0.2 V DC (Sampo FBT) or -172.5 ± 0.2V DC (LCE FBT) for CPT
CRT M41AGE93X46 (TCO) or M41AGE83X46 (MPRII) .
4-2-2 Screen and White Balance Adjustment
CONDITION
Press
1
and
2
buttons simultaneously when switching the power “On”.
Display image : No video (68.68kHZ Mode)
PROCEDURE
1
Raster color setting
1-a.
Set Brightness max. to 77, G1 to 60 (OSD cursor) and 530 ± 5 at G2, cursor.
1-b
Adjust R and B cutoff to min.
1-c
Adjust G cutoff to about 0.45FL
1-d
Adjust B cutoff to get y=298 ± 5, R cutoff to get x=283 ± 5 and Y=0.65 ± 0.05 FL.
1-e
Adjust Brightness cutoff to raster 0.01-0.02 FL.
CONDITION
Display image : 50 mm x 50 mm white block pattern
PROCEDURE
1
5500
0
K color temperature setting
1-a.
Set Brightness to cutoff and Contrast to maximum.
1-b
Move cursor on OSD to choose color temperature icon.
1-c.
With green block pattern, adjust G gain to get Y about 32FL.
1-d
Adjust R.B. gain to get x=333 ± 5, y=348 ± 5; and Y=40 ± 0.5FL
2
6500
0
K color temperature setting
2-a.
Set Brightness to cutoff and Contrast to maximum.
2-b
Move cursor on OSD to choose color temperature icon.
2-c.
With green block pattern, adjust G gain to get Y about 32FL.
2-d
Adjust R.B. gain to get x=313 ± 5, y=329 ± 5; and Y=43 ± 0.5FL
3
9300
0
K color temperature setting
3-a.
Set Brightness to cutoff and Contrast to maximum.
3-b
Move cursor on OSD to choose color temperature icon.
3-c.
With green block pattern, adjust G gain to get Y about 32FL.