Compaq Evo n1000v Compaq Evo Notebook N1020v Series, N1000v Series and Compaq - Page 130
Disconnecting the Keyboard-to-TouchPad Cable
![]() |
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Removal and Replacement Procedures 4. Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board (Figure 5-19). ✎ Dual Stick notebook models have an additional cable that must be disconnected. Release the ZIF connector 3 to which the keyboard-to-TouchPad cable is attached and disconnect the cable 4 from the keyboard. Figure 5-19. Disconnecting the Keyboard-to-TouchPad Cable 5. Remove the keyboard. Reverse the preceding procedures to install the keyboard. 5-24 Maintenance and Service Guide
![](/manual_guide/products/compaq-1500ap-compaq-evo-notebook-n1020v-series-n1000v-series-compaq-presario-1500-series-maintenance-service-guide-587370c/130.png)
5–24
Maintenance and Service Guide
Removal and Replacement Procedures
4. Release the ZIF connector
1
to which the keyboard cable is
connected and disconnect the keyboard cable
2
from the
system board (Figure 5-19).
✎
Dual Stick notebook models have an additional cable that must
be disconnected. Release the ZIF connector
3
to which the
keyboard-to-TouchPad cable is attached and disconnect the
cable
4
from the keyboard.
Figure 5-19. Disconnecting the Keyboard-to-TouchPad Cable
5. Remove the keyboard.
Reverse the preceding procedures to install the keyboard.